I am running a 100 wet shot on a single stock pump. I havent tried a bigger shot. AFR looked good on the 100.
I run 125hp on pump gas with 10.5:1 compression. Why are you running race gas?
Do you pull timing as well?
Will be there tonight trying out my Powerdyne setup. Will report back with times.
14.3 @95
2.1 60ft gonna try harder this time! Lol
- - - Updated - - -
05' ram 1500 rumble bee 15.6
I'm telling ya it's not as easy as it seems. I was hoping for a 13.999 but I knew it would be 14.3 w/ my low 5lbs boost. I'm gonna try to pulley it up a little bit and add a crane module and a bypass valve. Or may just throw my bottle back in? We'll see. I see aluminum heads in my future.c'mon man! - I was wanting to hear about a 13.5 run. How will I ever get mine in the 13's
Good luck help all goes well!!
That's what I'm talking about! which pulley set up? Could I just try a smaller blower pulley? Or do you think the crank pulley would be better to get a bigger one? I really do want to crack into the 13's. I currently have 6.5" crank and I believe either the 3" or the 3.15" blower pulley iirc?. Would a 2.87" make much difference?Pulley and ignition control and it will run mid 13's with ease.