shaunditty
Shaunditty
I got everything to rebuild the front suspension that I can think of except the sway bar bushings. I am benge watching Youtube videos on how it’s done. I’m gonna give it a whirl during this quarantine. Any suggestions and or tips are welcome and appreciated.
Ball joints
P# K8432T (x2)
P# K8431T (x2)
Adjustable Camber bushing kit
P# K8968 (x2)...... edit... (4/20/30) these bushings don’t fit. I ended up cleaning my originals and soaked them in Rustoleum Rust resolver and wire brush till they looked good. I might revisit this later if I don’t like how the tires sit.
Axle pivot bushings
P# K8300 (x2)
Outer Tie rod ends
P# ES2077RT
P# ES2078LT
Inner tie rods
P# DS1017T
P# DS1138T
Tie rods sleeves
P# ES2079S
P# ES2080S
Pitman Arm
P# K8750
Radius Arm bushing kit
P# K8361
Ball joints
P# K8432T (x2)
P# K8431T (x2)
Adjustable Camber bushing kit
P# K8968 (x2)...... edit... (4/20/30) these bushings don’t fit. I ended up cleaning my originals and soaked them in Rustoleum Rust resolver and wire brush till they looked good. I might revisit this later if I don’t like how the tires sit.
Axle pivot bushings
P# K8300 (x2)
Outer Tie rod ends
P# ES2077RT
P# ES2078LT
Inner tie rods
P# DS1017T
P# DS1138T
Tie rods sleeves
P# ES2079S
P# ES2080S
Pitman Arm
P# K8750
Radius Arm bushing kit
P# K8361
Last edited: