tomlightning
Active member
Email sent
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
File sent to the printer. I'll let you know this afternoon, and possibly have a sample rendering avail.Email sent
Sent from my SM-G965U using Tapatalk
Awesome thank you!!File sent to the printer. I'll let you know this afternoon, and possibly have a sample rendering avail.
Sent from my SM-G892A using Tapatalk
Tom, was actually able to do some digging around on the web, and it looks like that dash will fit great in the existing 7 inch design with some modifications.Awesome thank you!!
Sent from my SM-G965U using Tapatalk
Oh that would be sweet. I gotta get that dash and get it to you.Tom, was actually able to do some digging around on the web, and it looks like that dash will fit great in the existing 7 inch design with some modifications.
Sent from my SM-G892A using Tapatalk
There definitely is Jamie. I'm thinking about offsetting the 7 inch Holley display and adding the quick 4 next to it...Looks like there is room for something else in there too (just not sure what yet)
I would hold off on that. I talked to us shift the other day and they are working on there gen3 board and should be available in the fall. Its gonna have can bus. So im assuming its gonna be a little different. Hopefully a display thats mountable.There definitely is Jamie. I'm thinking about offsetting the 7 inch Holley display and adding the quick 4 next to it...
Sent from my SM-G892A using Tapatalk
I did hear something about that, but in all reality I'll be going with the th400 anyway and won't be using the quick 4 in any capacity. So it'll be another brand new in box part that I'm sellingI would hold off on that. I talked to us shift the other day and they are working on there gen3 board and should be available in the fall. Its gonna have can bus. So im assuming its gonna be a little different. Hopefully a display thats mountable.
Sent from my SM-G965U using Tapatalk
Compare those Dimensions to the Holley 7-inch Dash and you'll get a pretty good ideaI was just thinking. Would the cd7 fit in there?
Sent from my SM-G965U using Tapatalk
The screen itself is a inch taller or the dash piece itself is a full inch taller?So it looks like the aem cd7 is about a full inch taller. I looked at the pic of the holley 7" and its tough to see if there is any more room height wise
Sent from my SM-G965U using Tapatalk
I wouldn't worry so much about the outer Dimensions as the actual screen you would view. I bet if it's only a inch difference we can make some changes to the design and have it fit.The outside dimensions of the dash is about 1" bigger. Holley says there is 4.5 and the aem is 5.4
Sent from my SM-G965U using Tapatalk
There maybe some modification needed to the stock trim bezel. But would not know until I have it. We could try to lower it to fit under the trim piece, there are options.Do you think bc its got a little visor that it will be an issue since its bigger?
Sent from my SM-G965U using Tapatalk