The "common examples of jumpers" the graphic Jamie linked will tell you exactly what to install for a bank-to-bank, TFI setup.
Can I use the one jumper for the dual efans as a trigger to feed the SSR? Or do I need to do something different? Can they be controlled separately?
I’m going to wire it in as the fan controller to replace my current controller.
Sent from my iPhone using Tapatalk
Go to page 138 in the MS3 manual for more fan control options
https://www.ampefi.com/wp-content/uploads/ms3pro_ultimate_manual.pdf
Ok, with that info from you both, I will just turn them off and on with the Pimp.
Is there a way that the Pimp sees AC? I see that that is an option in the manual.
Sent from my iPhone using Tapatalk
Yes, there is an pin assigned that looks for a 12v input, I think Jamie tapped in to the low side switch all nice and neat. I do not know which one it is in the XShift, but the manual should have it.