Heading in right direction?

Tried to start it tonight, running into a no start issue, when I turn the key over the anti theft light is on, on the dash, and it doesn’t do anything, but when I jump the solenoid it spins over, just not very fast, which could just been my battery, but can’t figure out why it won’t turn over at the key, and can’t figure out this anti theft deal, I disconnected the module under the dash and been playing with turning they key over multiple times, still nothing, my key fob is dead not sure if that has anything to do with it, Any advice would be greatly appreciated.


Sent from my iPhone using Tapatalk
 
Could anyone tell me what this harness goes too? It’s down by the starter, it’s in the same loom with the starter harness, and would it be causing my truck not to fire from the key? I have replaced everything and traces grounds like crazy, and when I jump the solenoid it fires up but when I turn the key over I get nothing.
5099d1bfe0e9f88cf06f92189780effe.jpg



Sent from my iPhone using Tapatalk
 
I don’t think. My truck only had one front O2 when I got it. Converted to mass air and unhooked stock sensor from that connection. When I built my battery cables it had that wire in the loom running to to near solenoid


Sent from my iPhone using Tapatalk
 
Ok I was wrong, thank you, that helps, now if I can figure out why it’s not firing from the key, I must not have a ground right or something.


Sent from my iPhone using Tapatalk
 
Ok will do thank you, I got long tubes now so I don’t even know if the plugs even reach each other, I will have to work on that next.


Sent from my iPhone using Tapatalk
 
Thank you sir , I’m gonna use that to trace back and make sure I didn’t miss anything.


Sent from my iPhone using Tapatalk
 
My problem the whole time was the shifter linkage, got it adjusted and replaced the transmission range sensor and it fires right up by the key now. Thanks for everyone’s help, posting more progress pics, new rear shocks, new diff cover, and all that fun stuff
d3788d73225824cb76be8059ddf6fcc3.jpg
8a7b114e95cd37619aa2739b1cf99b1d.jpg
c3598738db36c56eab1876dee6b2236e.jpg
661f85a48d3f162fbe249a6fe8bcadd0.jpg



Sent from my iPhone using Tapatalk
 
Getting the exhaust finished up this week. It came out nice I’m happy with it.
9e371d877fd430a5c194d286d7bcbf0d.jpg
fdd3ac0555643e4a620a50dad4d8f86b.jpg
e018b71bb35ff8c6799369236c023e34.jpg
83647cb675a308fb5d273aa253cddf6a.jpg



Sent from my iPhone using Tapatalk
 
There the Mac long tubes for a fox body, and thank you guys I appreciate it.


Sent from my iPhone using Tapatalk
 
2e3a29f5f7a694a01080034b4e5b5fa4.jpg
just got my electric fans, very nice piece, hoping to get them mounted and wired in with my struckby fan controller before this hurricane hits here in Florida.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top