GT40 Nitrous Plate?

bobwhite said:
that's the old Twiggs County Dragway. looks like they've spent a lot of money on the track and retaining walls. it used to be a little ole country 1000 foot strip. i like your truck, nasty launch.
Click to expand...

Thanks man. That’s my first time there I’m from NJ but the track was very nice
 
I ran the GT40 plate kit for years at 150 and 200 Hp. Speed density truck pretty stock at that time. Only issue with that plate is changing the jets was a pain.
 
DAVE94LIGHTNING said:
I ran the GT40 plate kit for years at 150 and 200 Hp. Speed density truck pretty stock at that time. Only issue with that plate is changing the jets was a pain.
Click to expand...

Top of the intake has to come off I assume? I think it’s be ok with that for a safer set up. Do you guys recommend anything different than this plate?
 
Depends on how much nitrous you intend to run. If up to a 150 shot you can just do a simple wet or dry nozzle and it is much easier to install and tune with jetting changes etc.. that should put your truck into the high 11's or low 12's with a good 60ft time.
 
NX shark nozzle in the intake tube... Easy as you can get. The nozzle itself is rated to a 250 shot. Just have to make sure solenoids are up to the task. I wouldnt bother with a gt40 plate honestly.
 
I’m currently running a Nitrous Outlet wet nozzle drilled and tapped into my EGR eliminator plate. I liked it way better with the dry kit though and it went faster back then too
 
I've got a gt40 nitrous plate for sale if someone is interested. Has fuel and n2o solenoids attached to it. You'll need your own bottle, nitrous line and gauges etc. Hit me up if interested. Located in DFW tx and will ship.
 
I used this one. It was very nice, simple, instructions were good, plus it said how much timing to pull for what level of spray you choose. https://www.summitracing.com/parts/zex-82047

- - - Updated - - -

And this too...
https://www.summitracing.com/parts/zex-82001

This kit is way easier to install and remove if you need to. No removal of the manifold at all. I put a switch in-line with the WOT switch so I could manually turn it on once I was out of the hole with good traction.
 
shaunditty said:
I used this one. It was very nice, simple, instructions were good, plus it said how much timing to pull for what level of spray you choose. https://www.summitracing.com/parts/zex-82047

- - - Updated - - -

And this too...
https://www.summitracing.com/parts/zex-82001

This kit is way easier to install and remove if you need to. No removal of the manifold at all. I put a switch in-line with the WOT switch so I could manually turn it on once I was out of the hole with good traction.
Click to expand...

Think I’m gonna pull the trigger on this...

Nitrous Express 5.0L Fox Body EFI Nitrous Plate Systems 20955-10

1d454979f0bd2fb95bd2ad1b7a42097c.jpg
 
You must log in or register to reply here.
Back
Top