Spent some time reading about brakes and the TBM offerings. I like the "no drag" feature they advertise. I have a set of E150 spindles that i was going to use for the e-150 setup down the road, but if i can just run the bigger rotor and a better set of aftermarket calipers (like TBMs), that seems ideal. The mounting ears on the e-150 mearsures right at 5-7/8, which coicendetally is the same spacing as the 05-14 mustangs and looks like maybe they share same rotor diameter from reading the Factory Big Brake Thread. I can't help but wonder if any of the mustang caliber brakets could be used or if anyone have experience making a set of brackets for these or other spindles.