Looking for so advice. Unlike most of you running centrifugal super chargers, I have an old school Kenne Bell. After talking to Jon Bond the other day he suggested that I use a larger crank pulley rather than a smaller pulley on the SC due to slippage and belts coming off. This means I need a 7” crank pulley instead of the stock 6.5”. I have been searching all weekend in the internet and can’t find anything.
My current SC pulley is 2 5/8. I can get a 3 or a 4 but that is it. Jon said the max I should be spinning the KB is 14,700. A 7 in crank with my current SC pulley would be 1:2.666 which is about max.
Any help would be appreciated
1994 Black #1077
CI 351 H rods DSS TW pistons
Trick Flow 170s
Bassani 1 5/8” headers
KB 1.5L Supercharger
Meth Injection
Coil Near Plug
PiMPxs ECU
US SHIFT QUICK4
Punisher VB
WWW.Gen1Jonny.com
My current SC pulley is 2 5/8. I can get a 3 or a 4 but that is it. Jon said the max I should be spinning the KB is 14,700. A 7 in crank with my current SC pulley would be 1:2.666 which is about max.
Any help would be appreciated
1994 Black #1077
CI 351 H rods DSS TW pistons
Trick Flow 170s
Bassani 1 5/8” headers
KB 1.5L Supercharger
Meth Injection
Coil Near Plug
PiMPxs ECU
US SHIFT QUICK4
Punisher VB
WWW.Gen1Jonny.com