droppedf100
Active member
Your not talking about the white truck with the cap and old school Cragar SS wheels are you?
Your not talking about the white truck with the cap and old school Cragar SS wheels are you?
I think $17,500 was a reasonable price for that truck. Do you know who bought it? I would by it from them if they want to flip it for a profit.Your not talking about the white truck with the cap and old school Cragar SS wheels are you?
The wheels would have come off immediately. The emblems all over everything too. Great price especially since I can tune it myself.I have no clue it was listed a bunch of times. It was pretty ugly how it was set up Imo. Needed to be dropped with new wheels and pull the cap off.
I have a '93 Gen 1. I am the 2nd owner. Had truck shipped in an enclosed trailer from Idaho. Right now it is box stock. It has 87k original miles. I was in the process of installing a World Castings Bill Mitchell 427 cu in 425 hp Windsor engine in the L with a Tremec TKO 600 5 spd trans which I have still NIB but I had 2 back surgeries & just couldn't finish the job by myself & didn't trust anyone else to do it right. Engine has never been run except on Mitchell's dyno where he sent me the hp & trq figures on it. Then they drained the oil for shipping & it is still empty of oil. I occasionally squirt oil in the spark plug holes to keep the cylinders oiled. In addition to this engine I have the correct Bell Housing from a Mustang Cobra that allows me to attach the TKO 600. I also have aluminum flywheel high performance clutch, hydraulic slave cylinder, clutch hydraulic cylinder. The clutch pedal has been installed by me & that's when I realized I couldn't finish this by myself. All that needs to be done is to cut a hole in the floorboard 2" left of the center line for the shifter & you're home free. I have 4 NIB Gen 1 wheels.I have a new Cervini cowl hood, white gel coat. Body on L is perfect. No rust. Never been hit. No dents anywhere. '93 did not have clear coat pain originally & to make it look real good it will take a good black & clear coat paint job. As you know all Gen 1 L's came with a 4/11 gear in the rear end. As close as I can figure off the top of my head I have in excess of $22,800 involved in the truck right now. I think I would be looking for the whole bag of marbles $17,500 & you wouldn't have to buy anything additional. Just finish assembling it. What do you think?
good to see some one lookingView attachment 33944