banks
matt
i've been waiting for a week and a half to start this thread. got everything today from casey and the excitement really set in. thanks a lot casey for the great packaging and quick shipping for me. for those that don't know casey, he is a real standup guy and great to do business with. he has always been there to answer my dumb questions and give me advice along the way. if you don't know about the kit it was originally built by psi motorsports in texas for a 78 mm turbo. is has since gone through a couple of hands till casey got it and modified it slightly for his 88mm precision setup that went 6.18 in the 1.8th on 93 octance. he is going twins and i was lucky enough to get his setup that is going on my dd.
got everything in today and decided to get working on it to see how far i could get. i have a summer midterm tommorrow so i really shouldn't have been doing this at all since i haven't began to study and it's at 8 tomorrow morning.
anyway got everything installed up to the turbo. just set the turbo on the crossover for some pics and idea of where everything will be. the kit will be setup similar to ss this's to blow through the stock intercooler. it was really nice to finally get everything and see how it would look rather than just having to imagin things in my head since i hadn't seen anything.
anyway sorry for the babbling and on to the pics. if you guys have any questions just ask. constructive criticism is good too cause i'm still trying to learn as much as i can.
turbo kit, pars from summit and race part solutions. yeah all these boxes got me real excited
driver's side header was a little difficult but nothing too bad. had the move the abs module because the header wouldn't clear. going to have to fab up a small bracket to secure it in a place where it won't be too close to the header
passenger side header.. unfortunately i stripped out the last two holes on the top side. didn't even realize i had done it till i went back to check them all. going to leave it on till saturday when i modify the downpipe then pull it back off to put a helicoil in each hole.
threw the turbo up there just to see the orientation of everything.
hope to have some more pics once i modify the down pipe this weekend.
got everything in today and decided to get working on it to see how far i could get. i have a summer midterm tommorrow so i really shouldn't have been doing this at all since i haven't began to study and it's at 8 tomorrow morning.
anyway got everything installed up to the turbo. just set the turbo on the crossover for some pics and idea of where everything will be. the kit will be setup similar to ss this's to blow through the stock intercooler. it was really nice to finally get everything and see how it would look rather than just having to imagin things in my head since i hadn't seen anything.
anyway sorry for the babbling and on to the pics. if you guys have any questions just ask. constructive criticism is good too cause i'm still trying to learn as much as i can.
turbo kit, pars from summit and race part solutions. yeah all these boxes got me real excited
driver's side header was a little difficult but nothing too bad. had the move the abs module because the header wouldn't clear. going to have to fab up a small bracket to secure it in a place where it won't be too close to the header
passenger side header.. unfortunately i stripped out the last two holes on the top side. didn't even realize i had done it till i went back to check them all. going to leave it on till saturday when i modify the downpipe then pull it back off to put a helicoil in each hole.
threw the turbo up there just to see the orientation of everything.
hope to have some more pics once i modify the down pipe this weekend.