madramper
#projectplatypus
I have a 351w in my truck running off of an A9L. The meter is a C&L 76mm with 30# injectors. I have no emissions crap on the truck. These are the changes I plan on making. Is there anything else you would suggest?
Canister Purge Minimum RPM 9999
Canister Purge OL Enable 2
Checksum Base Address 0
EGR System Type 2
Engine Displacement 351
Idle in Gear 800
Idle in Neutral 800
Injector Slope High 30.5
Injector Slope Low 38.5
Thermactor Air Control Logic Enabled 0
Do I need breakpoint and minimum pulsewidth for injectors?
I have the MAF transfer in excel format that I got from VRIstang's website. How do I enter that? I know where it is, but it shows the first four X/Y axis as 0/13.629. Do I keep them as 0?
Thanks for the help!
Canister Purge Minimum RPM 9999
Canister Purge OL Enable 2
Checksum Base Address 0
EGR System Type 2
Engine Displacement 351
Idle in Gear 800
Idle in Neutral 800
Injector Slope High 30.5
Injector Slope Low 38.5
Thermactor Air Control Logic Enabled 0
Do I need breakpoint and minimum pulsewidth for injectors?
I have the MAF transfer in excel format that I got from VRIstang's website. How do I enter that? I know where it is, but it shows the first four X/Y axis as 0/13.629. Do I keep them as 0?
Thanks for the help!