I am going to be getting a set of ruslow 1000 or 1100lb coils to install along with djm control arms on the front of my truck. I want to get the ride height at 15.5-16", any ideas on how much of the coil would need to be trimmed? I've heard ruslow coils with the lower a-arms usually put the front right about 17.5". Also, any suggestions on the rear suspension to get the same height? Will I still be able to run a panhard being this low? (~16") My goals are a very well handling truck that I can take to the track on occasion. I'm coming from a z06 so I can't have any body roll in my truck . Thanks