Ram air kit

[svt450]

After much digging, I came up with an alternative to the diesel tube set-up.

I found an intake tube from a 94 Dodge van wtih the 318cid(I know I hate to put a Dodge part on too). I ran it from the drivers side air dam vent,up through the wheel well, and it plugs directly into the stock intake box tube! The scoop fits perfectly in the air dam vent. I drilled a few holes in the bottom of the vent to keep water from staying there. It seems to work really good. And it only costs about $20 from Dodge. The tube fit perfectly from end to end!

Jason

 

[Thundrn_Lightning]

...do you happen to have a part number for that? Just curious.

- Kevin

 

[Russ94]

By the way, does any one have a CURRENT part no. for the diesel inlet tube? The part no. listed on our site is nfg.

 

[Vern]

Somehow, the part no. on the website got a 'B' on the end of it instead of an 'A'. Use the same no. with a 'A' suffix and it'll work.

------------------
VJ Racing
Black 93 #3181
nloc 72
13.90@97.7