brettplaisance
Member
I'm trying to repair the harness I bought a while back. It's an fms harness. I've cut the wires at the plug and labeled them. I even ohmed everything to make sure everything else is good. It's a really clean harness but that one plug was corroded. I figured out the ecu plug on the ecu is the same so I went to the junk yard and destroyed the box getting the plug alone and in unharmed condition. I pulled it out of a black truck identical to mine but without ground effects. That was weird because I hardly see any trucks like mine let alone find one in the junkyard. Anyways I'm wondering how to approach getting the rest of the board off without damaging the pins. Also another issue is the Amber colored filler that was in the fms plug. I'm assuming it's some sort of weatherproofing for the pins. Does anyone know if there is something I can use to seal this thing up so it won't happen again? Is there an issue with bending the pins straight in order to gain more material to attach the wires to if I were to just cut the board off? All help is appreciated.