Well, last saturday I started my first step in actually converting my truck over. So, using an engine hoist and my hitch we raised the back end of my truck just enough to work underneath it. After bout 45 mins into we found ourselfs struggling with the drive shaft and emergency brake. We had the shocks disconnected but that was about it. I had the bolts off from the rearend but I couldnt get it actually disconnected...is there a trick or do I just need to man up?!? Also, whats the trick to the emergency brake cable? I mean I personally spent 45 mins wrestling with the damn cable to get it off so can someone help it out. Now, if ya'll can remember it rained hard for an hour or so and in that time I was under my truck dealing with the weather becasue i live in an apartment complex. We did this in my friends driveway in Ward, Ark. And, after some debating and arguing we decised to just put everything back together and start over next weekend. Im thinking I'll try to hobby shop on base but I really try to avoid that place at all cost. But it might be alil safer plus I might be short on help. Anywho, I know some of you have experence *Frank* so please grace me with your knowledge. Thanks