PAUL Lower pulley and Nitrous

[FastSVT]

I am currently running a flter kit and valve body in my 02 L. I am looking to do a lower pulley, dual program chip, and plugs. I am also looking to add a nitrous kit set up for a 75 to 125 hit. Can you tell me if the 6 lb pulley would be to much with the nitrous. Am I better off with a smaller lower pulley, or will the 6 be okay with the nitrous and the proper tune. Thank you.

 

[TZRIDER]

I believe I answered you in an e-mail. If not let me know
Paul

 

[FastSVT]

Sure did, thank you. See you at the shop.

Joe

 

[Jagged Edge]

Your looking for a bang for the buck

125 shot and 6 pound pulley and your engine will run great until the pistons start swaping holes.

JE

 

[380hp]

Is that also with a built motor! Or just a stock one? Thanks!

 

[Jagged Edge]

Is that also with a built motor! Or just a stock one? Thanks!

I was refering to a stock motor only.
JE