So I'm installing my line mod valve. Real simple install, everything goes as planned and I get everything buttoned up in about an 2 hours. I check out the transmission oil that came out and it looks great. I deceide to save $20 and re-use it. I fill her back up, add 1/2 quart of new fluid to top it off and I go for a test drive.
Shifts great, hits 2nd nicely and even chirps =)
I get back home and realize my tailgate was down
Of course, by bed is emply . . .
I scamper off to retrace my steps and sure enough, I find all the contents from my bed, scattered in the street.
- my box of gloves
- my stock size ASP upper pulley and allen key
- the top to the 30qt pan I used to drain the tranny into
- a box with an aftermarket pulley in it
BUT MY 11 QTS OF TRANNY FLUID (STILL IN THE BOX) ARE NO WHERE TO BE FOUND!!!
Somebody actually nabbed my tranny fluid
I can't help but laugh at my own idiocy.
Oh well, the lesson learned is simple:
CLOSE YOUR TAILGATE BEFORE TESTING NEW MODS
Shifts great, hits 2nd nicely and even chirps =)
I get back home and realize my tailgate was down
Of course, by bed is emply . . .
I scamper off to retrace my steps and sure enough, I find all the contents from my bed, scattered in the street.
- my box of gloves
- my stock size ASP upper pulley and allen key
- the top to the 30qt pan I used to drain the tranny into
- a box with an aftermarket pulley in it
BUT MY 11 QTS OF TRANNY FLUID (STILL IN THE BOX) ARE NO WHERE TO BE FOUND!!!
Somebody actually nabbed my tranny fluid
I can't help but laugh at my own idiocy.
Oh well, the lesson learned is simple:
CLOSE YOUR TAILGATE BEFORE TESTING NEW MODS