kidd
Member
1 - Place Switch in #1 position - the left horn button is now a momentary switch, depressing the horn now activates the Line Lock, as well as the Module #1 (4000rpm) for the tire warming.
2 - Release the horn and the Line Lock and Module #1 are disabled, now place the switch in the #2 position and arm the Nitrous switch.
3 - Stage at the Tree, depress the horn switch, now the Line Lock is applied and the Module #3 is active while the Nitrous is still disabled.
4 - Last yellow or green your choice, release the horn switch, disabling the Line Lock, Module #3 and simultaneously shooting 125 HP Nitrous, also defaulting to Module #2, NOW JUST HOLD ON and enjoy.
5 - End of the 1/4 mile, place switch in the center "off" position and now your horn functions just like factory, also disable your Nitrous switch.
Have attached the wiring schematic and relay layout.
Thanks to JMC, for the schematic.:thumbup:
Main Page @ kdracingteam.com
Last edited:
