Guys who removed the charcoal canister & stuff.

[Jamie V]

I really need the wiring from the engine harness to the canister purge valve (that’s the little solenoid valve that is mounted below the charcoal canister). Any of you guys have your old crap laying around?

It plugs into the engine harness right behind the alternator near the front of the valve cover.

 

[grinditout]

I probably have the plug.

- - - Updated - - -

Just let me know if I should look.

 

[Jamie V]

Yes please

 

[droppedf100]

What are you trying to use it for?

 

[Jamie V]

To wire up something using the stock harness with the megasquirt.

 

[grinditout]

I will look, as soon as I can.

 

[grinditout]

ok, do you see it, in the pictures?

Is it this one?

 

[Jamie V]

Can’t tell

 

[grinditout]

I am sure I have it, there are 3 harness here, is it on the passenger end of the engine harness?

Is it male or female? how many wires in ?

Do you want the engine end or the can end?

 

[Jamie V]

A fellow member Shelby took care of me and sent me one. Thanks again!!

 

[svtlightning207]

Looks like you got your part- in the future check out Rock auto- they have a lot of connector pig tails available. I pretty much snap every electrical connector I try to use so I've soldered new connectors on quite a few components..