direction sheet for a granatelli, metco, motoblue

srteric

srteric

Member
pulley with ring and hub anyone have the sheet for installing? Torque of the bolts?;k
 
Last edited:
what plugs you running? are you talking bout shortening the ropes...?

7mm bolts only need to be snugged IIRC its like 19in lbs....just snug is all you need.
 
this is for a pulley 6 pounder, I see the stock bolt is 14mm to remove it but need the torque for the new pulley 3 bolts.
 
the three bolts that hold the hub to the crank.....use some blue loctite and tq them to 40ftlbs

yes its 14mm for the stock crank pulley....its left hand thread FYI, righty loosely lefty tighty
 
the previous owner gave me a 6 pound hub and ring, MAC 95 mm setup, and a sct chip, he said install it all, you will be amazed, he had it all on a 2002 HD truck he had, I have a 2003 Lightning, I put the MAC on today, was easy.
 
You must log in or register to reply here.
Back
Top