svtsilverback
Member
Hey Stan i have your 1200lb coil springs on the front of my 2000 L. I only got a 1" drop from them. Right now my truck is at 18" from the middle of the center cap to the bottom lip of the fender. I would like to get it down to 16.5". How much of the coil spring should i cut off to get the 1.5" extra drop? Also how much will this increase the coil spring lbs rating?
Forget the pm i sent you about the belltech spindles. Seems like i am seeing to many bad things about them.
What swaybar do you suggest? i have been going back and forth between hotchkis and hellwig. current setup is 1200lb coils and hotchkis shocks on the front and hotchkis leafs and hotchkis shocks for the rear. the truck is o.t./and auto-xed. thanks for your time and help stan.
Forget the pm i sent you about the belltech spindles. Seems like i am seeing to many bad things about them.
What swaybar do you suggest? i have been going back and forth between hotchkis and hellwig. current setup is 1200lb coils and hotchkis shocks on the front and hotchkis leafs and hotchkis shocks for the rear. the truck is o.t./and auto-xed. thanks for your time and help stan.