Gen1SVE
Member
I found some extra time, a GT47-88 and had alot of stainless tubing and flange material sitting around. The results can be seen in the pictures. I recycled many pieces like a powerstroke downpipe flange for the compressor outlet flange, just fill the flange surface and mill it to give it more mating area. I constructed the downpipe flange to run a 4" downpipe. The bracket that holds the turbo from 1/2 inch plate and stainless angle. I will take more pics of the pieces as I tear the kit off to redo the headgaskets, loc-wires are weak.