Yes John, my brother in law and I will yank the motor and install the new one. I just got the truck home tonight and took a good look at it. It is not good at all, she blew out 4 holes in the block from just a visual stand point. After I get the top of the motor torn apart and the tranny and exhaust off, we will yank the motor and start to tear it down. We found the top of a rod without the wrist pin laying on the cross frame of the truck. Also had pieces of block laying everywhere. You are welcome to come out if you want. MY home # is (937) 393-5322 I'm usually home by 6:00pm everyday. I live near rocky fork lake.
Later
Rich
Oh, also my best in the truck was 12.19 @ 114 mph