8 rib Vortech Pulleys 19lbs injectors and (FMU sold)

[Required]

A few pulleys some stock know working injectors and a good used (FMU sold):

Stock 19lbs injectors working when replaced
$50
(Sold)Vortech 12:1 FMU with fuel lines for Lightnings.
$150

Vortech (silver) 8 rib 6.87”/6.0” $150
Very little use. Ran on my truck so I know it’s good to go.

Unknown (Black) 8 rib 6.87”/4.75” $125
Kinda ugly, I never mounted it but I’d run it.

Vortech Mondo WP pulley - $50
This is the one to use for 5.0 guys. Late 90s Vortech stuff.

Buyer pays shipping from Fort Worth, Texas.

 

[Blk02crewinms]

What water pump pulley are you running?

 

[Required]

I’m pretty sure it’s the ASP 520141.

 

[scott sanderson]

Can you tell me more about the black pulley.
Steel or aluminum, fitment?.
Wanting to convert 6-8 rib,
My lower is 6.87/ 4.5”

 

[Required]

Can you tell me more about the black pulley.
Steel or aluminum, fitment?.
Wanting to convert 6-8 rib,
My lower is 6.87/ 4.5”

It’s aluminum, I should get a picture and measurements of the spacing from the balancer out. I’ll do that in the morning.

 

[Required]

Can you tell me more about the black pulley.
Steel or aluminum, fitment?.
Wanting to convert 6-8 rib,
My lower is 6.87/ 4.5”

Measured them, they both are the same other than the accessory drive. I ran the Vortech for a while and it was brand new, got the black one with a bunch of parts.

 

[scott sanderson]

Thanks