Icepick said:
1 3/4 ceramic $499.
1 3/4 HTS $399.
1 5/8 ceramic $419.
1 5/8 HTS $319.
Orders can be placed by calling (937) 287-5085
Visa & Master Card excepted.
Thanks,
Icepick said:Stock headers are unequal length shortys... They are very "pinched down at the ports" and probaly rusty as well...
yes, If you buy a set of my long tubes and remove the front tank you will be able to route the exhaust like you want...
Dave
Icepick said:Sorry, I don't offer an X, H or exhaust system that is desiged to work with the front tank out exiting in front of each tire... I have made a few like that before but did not make any fixtures to reproduce it an sell via mail order... I probably should have because people ask for it quite often... So with that being said your going to have to either make it yourself of find someone local to do it for you... If your close enough to Dayton Ohio you can bring to me and I can make it for you...When building a system like this an H-pipe is much easier to do but it is possable to do an X as well...
Icepick said:about 20hp-30ft#'s on a stock truck and more if you have mods like heads, cam, intake, blower, etc.
Icepick said:Sorry, I don't offer an X, H or exhaust system that is desiged to work with the front tank out exiting in front of each tire... I have made a few like that before but did not make any fixtures to reproduce it an sell via mail order... I probably should have because people ask for it quite often... So with that being said your going to have to either make it yourself of find someone local to do it for you... If your close enough to Dayton Ohio you can bring to me and I can make it for you...When building a system like this an H-pipe is much easier to do but it is possable to do an X as well...