-->
Results 1 to 5 of 5

Thread: Feedback on Jetronic Injectors

  1. #1
    Registered User
    Name: Karl

    sg990's Avatar
    Join Date
    May 2012
    Location
    San Antonio, TX
    Posts
    266

    Feedback on Jetronic Injectors

    Has anyone used the 19lb Jetronic Injectors and do you have any feedback, good or bad? I would normally lean toward Bosch but having trouble finding a new set at a reasonable price. Or if there is another brand you recommend, Im open to suggestions. Thanks

  2. #2
    Registered User
    Name: Jonathan

    SVT1077's Avatar
    Join Date
    Mar 2017
    Location
    Queen Creek, AZ
    Posts
    712
    Quote Originally Posted by sg990 View Post
    Has anyone used the 19lb Jetronic Injectors and do you have any feedback, good or bad? I would normally lean toward Bosch but having trouble finding a new set at a reasonable price. Or if there is another brand you recommend, Im open to suggestions. Thanks
    You could have your existing ones rebuild?

    Sent from my SM-G991U using Tapatalk
    2018
    Motor was replaced by PO at 87K with a Ford Lightning Reman long block. Still stock
    Engine Management: Stinger Performance PiMPxs

    Trans has street edition Punisher Valve body with Quick4 Trans controller

    2020/2021 Plans:

    Install the CAS that has been sitting on the shelf so that I can install CNP.
    Install TorqStorm Supercharger and support hardware
    Upgrade to 6R80 trans with Quick 6 controller

  3. #3
    Registered User
    Name: Karl

    sg990's Avatar
    Join Date
    May 2012
    Location
    San Antonio, TX
    Posts
    266
    Long story but apparently this truck had a mass air at some point and cheap (24#?) injectors were installed. Now at least one or two have failed open and is causing almost instant flooding.

    93L Black daily driver
    95L White Work in Progress
    84 Capri RS 483ci BBF
    15 Mustang

  4. #4
    Registered User
    Name: Justin


    Join Date
    Aug 2020
    Location
    Gardner KS
    Posts
    16
    I will have a set of what I belive to be stock injectors avaliable.
    Putting a 427 in my truck this winter.
    Not sure what you time frame is. Should be ready to let them go in a month or so.

  5. #5
    Registered User
    Name: Karl

    sg990's Avatar
    Join Date
    May 2012
    Location
    San Antonio, TX
    Posts
    266
    Quote Originally Posted by siderbox View Post
    I will have a set of what I belive to be stock injectors avaliable.
    Putting a 427 in my truck this winter.
    Not sure what you time frame is. Should be ready to let them go in a month or so.
    Thank you, I appreciate it, but I bought a rebuilt set of Originals. After reading LMRs site the Jetronik injectors are reman injectors so that kind of answered my question.

    93L Black daily driver
    95L White Work in Progress
    84 Capri RS 483ci BBF
    15 Mustang

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •