Trans control chip

[JSP8572]

Sal,

I was directed your way for a chip. The trans in my 94 L shifts way too hard into D, R, and on the 1 to 2 shift. Is there a chip you could burn to adjust the "epc", or line pressure? Here is a link to the thread I started about my problem. http://www.nloc.net/vbforum/showthread.php?t=119117 I like how the trans shifts under WOT, but it bangs much too hard at slow speeds and upon shifting into D or R. Let me know what you think. Thank you!

 

[Lightningtuner]

Sal,

I was directed your way for a chip. The trans in my 94 L shifts way too hard into D, R, and on the 1 to 2 shift. Is there a chip you could burn to adjust the "epc", or line pressure? Here is a link to the thread I started about my problem. http://www.nloc.net/vbforum/showthread.php?t=119117 I like how the trans shifts under WOT, but it bangs much too hard at slow speeds and upon shifting into D or R. Let me know what you think. Thank you!

I CAN do a chip to lower the shift pressure at part throttle, but honestly, I'd rather see you fix it mechanically.

I think a better choice, would be to put the STOCK VB back in, and then let me enhance the shifts to your liking with the chip. On the Gen 1s, I can make the trans snap your neck through the tune if you like .