Stainless Brake Lines?

R

Ruslow

Guest
Ok, I can put together a parts list of what yo need to do the flexible lines all 3 rear lines also.But I can not sell it as a kit but can sell as pieces,minus one piece.but need to know how many are interested.if I sell everything at once then it is a kit and I have to assume huge liabilty,so I can sell all but one piece.Stan
 
Firmer brake pedal.Which gives better brake controll.Stan
 
Stan, I'm interested also.

BTW, when you're installing the stainless braided lines, you'll probably need a set of these:

http://www.speedbleeder.com/main.htm

Pretty slick if you ask me. What size would we need Stan?

------------------

476-601-4438-thumb.jpg


NLOC #307
12.93 @ 106.50

2001 KCIR Fun Ford Weekend
Lightning Class Winner

2001 Crown Autocross Club
E Street Prepared Champion
 
I've seen thoughs.I don't know how well they work I bleed my brakes by gravity as the final step to get all the air out.Stan

BTW,should have the lines after the 1st of the yr.
 
<font face="Verdana, Arial" size="2">Originally posted by Ruslow:
I've seen thoughs.I don't know how well they work I bleed my brakes by gravity as the final step to get all the air out.Stan

BTW,should have the lines after the 1st of the yr.</font>
Click to expand...


A lot of the open track guys around here swear by them. We were in a brake discussion on our local auto-x list and this subject came up...quite a few people mentioned they used these with good results.

My problem is I don't know what size the stockers are, nor the thread pitch. Any ideas on that?


------------------

476-601-4438-thumb.jpg


NLOC #307
12.93 @ 106.50

2001 KCIR Fun Ford Weekend
Lightning Class Winner

2001 Crown Autocross Club
E Street Prepared Champion
 
The thread on the caliper is 3/8 nf the length is 19 to 20 inches and you use a #3 hose.Hope that helps Stan
 
<font face="Verdana, Arial" size="2">Originally posted by Ruslow:
The thread on the caliper is 3/8 nf the length is 19 to 20 inches and you use a #3 hose.Hope that helps Stan</font>
Click to expand...

Thanks Stan. Is that for the bleeders or the lines?



------------------

476-601-4438-thumb.jpg


NLOC #307
12.93 @ 106.50

2001 KCIR Fun Ford Weekend
Lightning Class Winner

2001 Crown Autocross Club
E Street Prepared Champion
 
Stan; I got a reply back from them about the bleeders needed;

"The size you need is SB3824 front and rear. The Speed Bleeders are $7 each
and $3 for s&h. So a total of 4 Speed Bleeders would be $31."




------------------

476-601-4438-thumb.jpg


NLOC #307
12.93 @ 106.50

2001 KCIR Fun Ford Weekend
Lightning Class Winner

2001 Crown Autocross Club
E Street Prepared Champion
 
You must log in or register to reply here.
Back
Top