r1concepts
Supporting Vendor
R1 Concepts Inc. is proud to offer Premium & E-Line Lightning rotors!
We offer two different series of rotors for your car. My stage one rotors are my E-line series rotors. Those are the ones that come dipped entirely in G3000 metal material like your originals. E-line rotors are the same size diameters as your originals. I also carry a second stage which is the Premium series rotors made with an even stronger iron cast graded metallurgy (G3500) and comes with a black E-coat rust protection coating applied on the center hub and inner vane structure and outer rim of rotor. Premium rotors have better air flow because they are built with a 50/50 center split vane structure design (some also comes curved vane and columned) for efficient air distribution to try to eliminate heat spots. Premium rotors are stronger than the E-lines and also same diameters as originals, direct bolt on. Both series comes with double disc grinding surface which leaves a non-directional finish on the friction surface area for more effective pad-rotor break in. This special finish also provides quieter and smoother stops.
Here at R1, we take many precautions in drilling rotors. All R1 Concepts rotors are machine drilled here in La Habra, California. We drill with smaller diameter holes and counter sink each hole. You can also go with just slotted only or whatever design you wish. When ordered with slots, every R1 rotor will come with our exclusive Diamond Slot design (45 degree angle end points), to help release trapped debris. Also a good indicator for rotor wear life.
AVAILABLE STYLES
Slotted Only
Drilled and Slotted
Drilled Only
Dimple and Slotted
Custom/ Engravings*
(ft/rr = front and rear)
(*engravings cost may vary)
FT/RR Premium Rotors
97-11/99
Orig: $492.40 Sale Price: $355.00
12/99-11/04
Orig: $492.40 Sale Price: $355.00
FT/RR E-line Rotors
97-11/99
Orig: $306.89 Sale Price: $230.00
12/99-11/04
Orig: $306.89 Sale Price: $230.00
Shipping: $30 (Front and rear setup). (AK, HI, International will cost more)
PADS
FT/RR HAWK HPS PADS: $135
FT/RR STOPTECH PERFORMANCE PADS: $100
BRAKE FLUID
ATE SUPER BLUE (1LT): $12
CALIPER PAINT
G2 Caliper Paint: $34
(all colors of rainbow, black, silver, pink available)
Contact Info
IF YOU HAVE ANY QUESTIONS OR WANT TO PLACE AN ORDER, PM WOULD BE BEST.
PM: r1concepts
Email: steven@r1concepts.com
Steven B.
Phone: 888-712-6623 ext. 7006
We offer two different series of rotors for your car. My stage one rotors are my E-line series rotors. Those are the ones that come dipped entirely in G3000 metal material like your originals. E-line rotors are the same size diameters as your originals. I also carry a second stage which is the Premium series rotors made with an even stronger iron cast graded metallurgy (G3500) and comes with a black E-coat rust protection coating applied on the center hub and inner vane structure and outer rim of rotor. Premium rotors have better air flow because they are built with a 50/50 center split vane structure design (some also comes curved vane and columned) for efficient air distribution to try to eliminate heat spots. Premium rotors are stronger than the E-lines and also same diameters as originals, direct bolt on. Both series comes with double disc grinding surface which leaves a non-directional finish on the friction surface area for more effective pad-rotor break in. This special finish also provides quieter and smoother stops.
Here at R1, we take many precautions in drilling rotors. All R1 Concepts rotors are machine drilled here in La Habra, California. We drill with smaller diameter holes and counter sink each hole. You can also go with just slotted only or whatever design you wish. When ordered with slots, every R1 rotor will come with our exclusive Diamond Slot design (45 degree angle end points), to help release trapped debris. Also a good indicator for rotor wear life.
AVAILABLE STYLES
Slotted Only
Drilled and Slotted
Drilled Only
Dimple and Slotted
Custom/ Engravings*
(ft/rr = front and rear)
(*engravings cost may vary)
FT/RR Premium Rotors
97-11/99
Orig: $492.40 Sale Price: $355.00
12/99-11/04
Orig: $492.40 Sale Price: $355.00
FT/RR E-line Rotors
97-11/99
Orig: $306.89 Sale Price: $230.00
12/99-11/04
Orig: $306.89 Sale Price: $230.00
Shipping: $30 (Front and rear setup). (AK, HI, International will cost more)
PADS
FT/RR HAWK HPS PADS: $135
FT/RR STOPTECH PERFORMANCE PADS: $100
BRAKE FLUID
ATE SUPER BLUE (1LT): $12
CALIPER PAINT
G2 Caliper Paint: $34
(all colors of rainbow, black, silver, pink available)
Contact Info
IF YOU HAVE ANY QUESTIONS OR WANT TO PLACE AN ORDER, PM WOULD BE BEST.
PM: r1concepts
Email: steven@r1concepts.com
Steven B.
Phone: 888-712-6623 ext. 7006
Last edited: