SWThomas
El Cazador
In my other thread I mentioned that we did the 255 Fuel Pumps and the QA1's at the same time. I thought I would include some pics of the QA1 install also. These are some beautiful shocks and they are very light. I went with the upper shock mounts from Stan @ Ruslow and they worked great.
Here are some shots of the old Bilstein shocks with the bed removed.
Here are the QA1's. The one on the right has the Ruslow upper shock mount installed.
And here are some shots of the QA1's after they were installed.
The ride seems to be a little smoother now. I did some riding around and decided that the best feel for me was with them set to the 6 setting on both sides. These shocks are a little smaller at the bottom than the stock ones. This was not a problem though because the lower shock mounts only had to bend slightly to get a snug fit.
If anyone has any questions, please PM me and I will do my best to help you.
Here are some shots of the old Bilstein shocks with the bed removed.
Here are the QA1's. The one on the right has the Ruslow upper shock mount installed.
And here are some shots of the QA1's after they were installed.
The ride seems to be a little smoother now. I did some riding around and decided that the best feel for me was with them set to the 6 setting on both sides. These shocks are a little smaller at the bottom than the stock ones. This was not a problem though because the lower shock mounts only had to bend slightly to get a snug fit.
If anyone has any questions, please PM me and I will do my best to help you.
Last edited: