New guy

Shop_queen93

Shop_queen93

New member
Hey everyone! Look forward to meeting fellow lightning enthusiasts to share ideas with. I have a raven black 93 L #594. Still a work in progress and will post updates as I get further in my turbo build
f042ce7e8d945e61f04e3bd3993bbdfc.jpg



Sent from my iPhone using Tapatalk
 
Shop_queen93 said:
Thank you, it’s just a DJM 3/4 drop with the slapper removed. Planned on lowering the rear more but how it sits has grown on me


Sent from my iPhone using Tapatalk
Click to expand...

What size rims? 17”?
Didn’t you put a 5 speed manual trans in it?


Sent from my iPhone using Tapatalk
 
LotsOfBirds said:
Do you have a build list for the trans swap? Also you are like 2 hours away from me.
Click to expand...

Here's my list I put together for my TKO 600 swap.

TKO 600 w/26 spline input shaft
Steeda Tri-axe handle w/ 2 x 3.75” long (12mm x 1.75) extenders on middle of rear shift location
FRPP bellhousing M6392R58
FRPP steel flywheel M-6375-A302B
FRPP flywheel bolts M-4216-A210
FRPP pressure plate a dowel kit M6397A302
FRPP pilot bearing M7600A
McLeod clutch 75007
Ford clutch pedal assembly F3TZ-2455-A
Custom made transmission crossmember
Energy Suspension trans mount 4.1104G
Custom driveshaft from 4.0” Aluminum tube / 31 spline forged yoke / companion flange DIM # 1 = 57 ¼” DIM # 2 = 4.25 BC / 2” R Spline 31 for TKO600 Part number from MDL is MD-DSA-4.031F-1330
Mustang lower shift boot cover

Clutch setup-
Master cylinder - Wagner CM110710 housing w/Dorman CM350032 base
Tilton slave cylinder Modern Driveline MD-900-2502-A
 
You must log in or register to reply here.
Back
Top