need a stock configuration

93Lightning5.8

93Lightning5.8

Member
Think i may have messed something up when I was setting up my tweecer I now have no spark. Want to plug my tweecer in with the stock file on it to see if it fixes it

Thanks
Peter
 
I'm new to the Tweecer myself, but I have learned when you read your EEC. That should be a stock tune, I think. You can go in and look at it make sure everything working. Then save it as your own tune and call it something else then run it.
I won't change your original tune.
 
In the event that you are issuing material despite the fact that there is no stock with you, that is the negative stock for that capacity area.

In sap you have to consider this working at SPRO > MM > stock administration and physical stock > merchandise issue/exchange posting > permit negative stocks select your plant and capacity area and make tick mark for the check box
 
You must log in or register to reply here.
Back
Top