Ad Expired: Motherload of gofast parts

Status
Not open for further replies.

Bonestk87

Jeremy
******NO TRADES. CASH OR PAYPAL************************

******UPDATED 05/11/14 @ 10:40am*******


*******PRICES DO NOT INCLUDED SHIPPING*******



Go Fast Parts for a 302cu In Fox Body Mustang and 98 up Mustang GT

-306. 3500 Miles. SpeedPro Hyp Pistons, Clevite Bearings, Meiling High Vol oil pump, ARP oil pump shaft, E-cam, Double roller timing chain, 1.7 roller rockers. Runs perfect. No spray or boost ever put on it. Parting car out. $800



-Edelbrock Performer RPM EFI intake. Excellent shape. Painted. $325


-BBK Cold Air Intake. Part#1557 $75


-Flowmaster 2 1/2in Mandrel bent tailpipes for a 87-93 GT. 50miles on them. Part#15805 $100



-MSD 6AL Box W/pills $150 ***HARNESS NOT INCLUDED****


-MSD 6AL Jumper harness for Fox body Mustang.
Part#8874 $15 Shown in above pic.

-Ford Racing Plug Wires (Blue) Part# M-12259-C301 $30 ***DISTRIBUTOR AND CAP NOT INCLUDED****


-MSD Adjustable Spark Timing Control. Part#8680 $100




-Ford Racing 30Lb Injectors. 0 Miles since being cleaned and checked. $125


-C&L 80mm Mass Air W/ 30lb injector sampling Tube. $100


-Percy’s handheld EGT Monitor w/ 2 Probes. $165


-Underdrive Steel Crank & Waterpump pulleys. $50



-Comp Cams Push rods. 6.550 length .080 thick


-Diablo Mafia $100


-Diablo Predator U7146 Unlocked. $200


-Moroso Coolant Catch can $65


-EECIV Breakout box. Used a handful of times. $265



-HICKOK Super Star II tester. $100


-Battle Box Reinforcment Upper Torque box plates.
$40 *****MISSING 1 SPACER****


-Granetti Mass Air Conversion Harness. Brand new. $75


-Mcleod Ext. clutch fork for a TKO with Blowproof bellhousing, $50



Best to text or call with questions.

Thanks for looking,
Jeremy
972 948 1921 cell
 
Last edited:
Good to meet ya Jeremy. Thanks for the hook up on the headers mid pipe and mufflers. My 85 will appreciate it that is as soon as I get them put on. Likely next weekends project.
Anyone interested in the other parts I assure you they are on the up n up.
Jeremy is a great guy to deal with.
 
Very nice to meet you and your wife also. Thanks for meeting up. Post a video up of what it sounds like when you get them on. Thanks Don!
 
Ill do that. I just made a current set up clip so Ill post before n after clips. I decided to dive in Today and already got old off and about to stab the pass side one on as soon as I finish me some lunch.
 
Status
Not open for further replies.
Back
Top