help ID disconnected wire in door switch

92Nite

New member
Good evening. I have a weird issue happening. My electric door locks suddenly stopped working on both doors. You can hear something happening when the unlock is depressed (nothing on lock), but no mechanical movement of the lock itself. They have worked fine for years, but now nothing. I pulled the passenger side switch, and noticed a loose wire. Not certain as to where it should be.
My knowledge of auto electronics is that I know that I know very little. Any help is appreciated. I did try downloading another photo of the switch from a different perspective. Would not upload. I hope this is enough
 

Attachments

  • switch2.jpg
    switch2.jpg
    76 KB · Views: 16
Looks like lower left just above the screw.
Notice how all the others look and its obvious that one is broken.

Also most often the solenoid actuator in the door that moves the lock is what goes TU. If it clicks but no movement then that will let you know.

However I do see that wire is disconnected.


Sent from my iPhone using Tapatalk
 
Back
Top