Capri & Mustang stuff-> Welds, Centerlines, Jaz seat, RCI harness

C

CAPTAIN

Guest
Begining to part out my 85 Capri RS:

- Two 15/8" Weld Draglites w/ BFG 225/50/15 tires, 4 lug. Wheels in decent shape, tires have 2-3,000 miles on them. Have caps & lugs. $200

- Two 15/8 Centerline Convo Pro w/ Futura 275/60/15 tires, 4 lug. Wheels in decent shape, tires have 2-3,000 miles on them, Have caps & lugs. $200

- JAZ race bucket seat w/ black seat cover. $50

-RCI 5 point harness, blue. $30

I have many other 5.0 302, racing, & Mustang/Capri parts available. Email me if you're looking for something in particular, for a carbed smallblock or Mustang/Capri specific. I have tons of stuff laying around including a set of Capri fenders, interior, & aftermarket/stock engine parts.
 
Do you have a phone # to be reached at? One of my good friends is building a race car using a capri. You can e-mail it to me if you do not want to post it.
Jeff
 
Do you have an aftermarket hood that you might be interested in getting rid of that will fit on an 89GT. I am also looking for an aftermarket shifter for a T-5, performer rpm EDL. intake for a 351W, Holley Mech. fuel pump, 31 spline axles, aft. market motor mounts solid or not, vaccum advanced distributer for 351W, MSD or other IGN., and many more conversion parts to put Lightning motor in my STANG.....
 
JEFF, 732-804-3680

JAMES, SORRY NO HOOD FOR A STANG. I HAVE A PERFORMER RPM INTAKE FOR A CARBED 302, MSD BILLET DISTRIBUTER FOR A 302, ALL MOUNTS ARE GOING W/ THE CHASSIS INCLUDING THE WHOLE REAR & 31 SPLINES. I DO HAVE A COUPLE OF MSD BOXES & BLASTER 2 COILS. I'M PROBABLY GONNA KEEP 1 OF THE BOXES AS A BACKUP FOR THE L (I HAVE A HISTORY W/ BLOWING UP MSD 6AL'S, LOL), SO I'LL PROBABLY LET THE 6A & COILS GO.
 
im intrested in your seat and harness -e-mail me at staged18@aol.com if you still have them .thanks alot
 
Back
Top