Turbosvt93
Active member
I cant do it or know how to do it. I need it to show how my setup is down. Thanks in advanced.
Adam
Adam
Can someone host a pic for me
- Thread starter Turbosvt93
- Start date
Turbosvt93
Active member
email sent. Thanks again
Get 'er done!
Just Headers...Honest!!
L
That's a cool set-up!
That's a cool set-up!
Turbosvt93
Active member
It needs some work but for now it runs real good. I just need some advice as far as the wastegate goes.
gasguzzler
Grasshoppa'
Turbosvt93 said:
To plumb the wastegate. Put a T in the line coming from the compressor cover so that the air hits the wall and needs to turn right or left. Put one side of the T to the port on the wastegate you are currently using. Put the other side to a bleeder valve and to the top of the wastegate. Use the bleeder valve to adjust your boost. Let me know if you have any other questions
- Brian
Brian, I think he was actually worried about the exhaust flow through the gate itself...
gasguzzler
Grasshoppa'
FMOS Racing said:
Doh:banghead: