AZ94LIGHTNING
Member
Hey Dave I was wonerding what belt to use for the pullies I got from you??? Also do you know what belt to use for your pullies AND by-passing the AIR PUMP???? I need .25 for the 13's HELP!!!
Tony:tu:
Tony:tu:
Belt Part #
- Thread starter AZ94LIGHTNING
- Start date
Icepick
Active member
Hi Tony!
Your parts shipped yesterday,
The belt with the air pump working is a 99.5, I'm not sure of the length without the air pump but the best way to find out is cut your old belt wrap it around all the pulleys then measure it... Once you find out the proper length let me know so I can pass the info along to someone else in the future!
A tip, You might consider changing the routing of the belt... Stock it goes from the
Crank - Air Pump - Tensioner - Alternator
Try changing it so it goes,
Crank - water pump - tensioner -Alternator
It will get better belt wrap this way...
Good luck!
Your parts shipped yesterday,
The belt with the air pump working is a 99.5, I'm not sure of the length without the air pump but the best way to find out is cut your old belt wrap it around all the pulleys then measure it... Once you find out the proper length let me know so I can pass the info along to someone else in the future! A tip, You might consider changing the routing of the belt... Stock it goes from the
Crank - Air Pump - Tensioner - Alternator
Try changing it so it goes,
Crank - water pump - tensioner -Alternator
It will get better belt wrap this way...
Good luck!