air intake

scott sanderson

scott sanderson

Active member
Dave i have a powerdyne s/c with ford mass-air. was wondering if you sell cold air intake system or have in stock thanks scott.
 
Hello,

I don't make those anymore but I can tell how to do it... if you go to this place http://store.airflo.com/exhaust-elbows.html you can buy a 3.5 rubber 90 elbow and install that on to the blower inlet then install a 3.5 tight radius 90 3.5 metal exhaust elbow into that... attach a MAF adapter to metal elbow...

Good luck!
Dave
 
Thanks Dave i think thats what i will do, now is that directed to the front by the hole in the core support? If there is any more pieces i need please let me know thanks scott.
 
Yes, The filter will be located near the hole in the core support and you will want to relocate the coolent overflow tank to the inner fender... I would make a little support bracket from the AC compressor to the MAF adapter to give it some support... You might want to buy some T- bolt or consistant torque clamps as well...

Good luck!
Dave
 
You must log in or register to reply here.
Back
Top