4 pins are different, 10, 20, 30 and 35.
94 Pin 10 = circuit 347, ground power feed from the AC Clutch Cycling Switch to the AC High Pressure Switch
94 pin 20 = circuit 883, AC pressure switch signal path for the AC Clutch Cycle Switch to the PCM
94 pin 30 = circuit 570, ground Ground connection between the Distributor and Ignition Control Module
94 pin 35 = circuit 330, power steering pressure switch - should not be applicable on a 5.8
95 pin 10 = circuit 441 power feed from the AC Clutch Cycling Switch to the AC High Pressure Switch
95 pin 20 = circuit 198 signal path for the AC Clutch Cycle Switch to the PCM
95 pin 30 = circuit 938 Not used on 5.8 Ground connection between the Distributor and Ignition Control Module
95 pin 35 = not used