8 rib Vortech Pulleys 19lbs injectors and (FMU sold)

Required

Paid NLOC Member
I Support the NLOC
A few pulleys some stock know working injectors and a good used (FMU sold):

Stock 19lbs injectors working when replaced
$50
(Sold)Vortech 12:1 FMU with fuel lines for Lightnings.
$150

Vortech (silver) 8 rib 6.87”/6.0” $150
Very little use. Ran on my truck so I know it’s good to go.

Unknown (Black) 8 rib 6.87”/4.75” $125
Kinda ugly, I never mounted it but I’d run it.

Vortech Mondo WP pulley - $50
This is the one to use for 5.0 guys. Late 90s Vortech stuff.

Buyer pays shipping from Fort Worth, Texas.900ED787-9ECD-4E2E-854E-123D8326F4F2.jpeg
 

Attachments

  • 2C4CA22F-2903-4BE4-9D9A-D0514EC6AF2B.jpeg
    2C4CA22F-2903-4BE4-9D9A-D0514EC6AF2B.jpeg
    216.3 KB · Views: 20
  • 2F163172-CA6A-422F-8AD6-94DCA01BE66D.jpeg
    2F163172-CA6A-422F-8AD6-94DCA01BE66D.jpeg
    167.6 KB · Views: 19
  • 15AADB75-94B5-4F31-BE4C-82F4C4137C4E.jpeg
    15AADB75-94B5-4F31-BE4C-82F4C4137C4E.jpeg
    271.5 KB · Views: 16
  • E9C88FC4-4066-4134-8A31-B4BC7EAAADBD.jpeg
    E9C88FC4-4066-4134-8A31-B4BC7EAAADBD.jpeg
    261.4 KB · Views: 7
Last edited:
I’m pretty sure it’s the ASP 520141.
 

Attachments

  • B9DC2B82-EEEA-4DCC-813D-DC89C33DE1BB.jpeg
    B9DC2B82-EEEA-4DCC-813D-DC89C33DE1BB.jpeg
    247.4 KB · Views: 16
Can you tell me more about the black pulley.
Steel or aluminum, fitment?.
Wanting to convert 6-8 rib,
My lower is 6.87/ 4.5”
 
Can you tell me more about the black pulley.
Steel or aluminum, fitment?.
Wanting to convert 6-8 rib,
My lower is 6.87/ 4.5”
It’s aluminum, I should get a picture and measurements of the spacing from the balancer out. I’ll do that in the morning.
 
Can you tell me more about the black pulley.
Steel or aluminum, fitment?.
Wanting to convert 6-8 rib,
My lower is 6.87/ 4.5”
Measured them, they both are the same other than the accessory drive. I ran the Vortech for a while and it was brand new, got the black one with a bunch of parts.
 
Back
Top