Need a 50 or 75 shot to get this beast moving - how?

svtbarry · 11-05-2009, 07:30 PM

I think I really need to spray a small shot for the initial 1.5 - 2.0 seconds on the launch. I have a zex system to install which is controlled by the TPS at WOT so how do I go about spraying for that small amount of time? Which window switch or controller do I use? Thanks.

69Roadster · 11-05-2009, 09:29 PM

The ZEX turbo kit comes with an adjustable switch that turns the nitrous off at a set boost level. It's made specifically for "eliminating turbo lag". Don't know the part number but I'm sure you can call them and order it. It's the black piece in the center of the picture here...

ZEX link

svtbarry · 11-05-2009, 10:53 PM

Great answer. Thank you. I'll get investigating that part. Anyone using this piece in their setup?

svtbarry · 11-06-2009, 05:00 PM

OK, so I've ordered that part ( part # 82081 ) from ZEX - around $42. The guy I spoke to - William, said that it replaces the TPS which is somewhat confusing. I guess the instructions will explain all, I hope!

1fst54 · 11-06-2009, 07:13 PM

You could have used a Hobbs switch. 19.00
I also need a 75 shot until 12psi.

11-05-2009, 07:30 PM	#1 (permalink)
svtbarry Registered User Join Date: Mar 2004 Location: Central Florida Posts: 2,737 View this user's gallery iTrader: 9 / 100%	Need a 50 or 75 shot to get this beast moving - how? I think I really need to spray a small shot for the initial 1.5 - 2.0 seconds on the launch. I have a zex system to install which is controlled by the TPS at WOT so how do I go about spraying for that small amount of time? Which window switch or controller do I use? Thanks.

11-05-2009, 09:29 PM	#2 (permalink)
69Roadster Registered User Join Date: Jun 2002 Location: Madison, AL Posts: 155 View this user's gallery iTrader: 2 / 100%	The ZEX turbo kit comes with an adjustable switch that turns the nitrous off at a set boost level. It's made specifically for "eliminating turbo lag". Don't know the part number but I'm sure you can call them and order it. It's the black piece in the center of the picture here... ZEX link __________________ -Donny turbo white Lightning

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode




Home \| Classified Ads \| Gallery \| Join the Club \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

11-05-2009, 10:53 PM	#3 (permalink)
svtbarry Registered User Join Date: Mar 2004 Location: Central Florida Posts: 2,737 View this user's gallery iTrader: 9 / 100%	Great answer. Thank you. I'll get investigating that part. Anyone using this piece in their setup?

11-06-2009, 05:00 PM	#4 (permalink)
svtbarry Registered User Join Date: Mar 2004 Location: Central Florida Posts: 2,737 View this user's gallery iTrader: 9 / 100%	OK, so I've ordered that part ( part # 82081 ) from ZEX - around $42. The guy I spoke to - William, said that it replaces the TPS which is somewhat confusing. I guess the instructions will explain all, I hope!

11-06-2009, 07:13 PM	#5 (permalink)
1fst54 Turbo Inside! Join Date: Jun 2005 Location: Florida Posts: 1,238 View this user's gallery iTrader: 0 / 0%	You could have used a Hobbs switch. 19.00 I also need a 75 shot until 12psi.