MY new build....sorry

denali_on_26's · 09-11-2008, 02:25 AM

well want to tell everyone hey!!
and as everyone knows my turbo lightning burned a month ago or so without insurance on it.....
so now this is what i will be building

i just picked up a 2001 2 door blazer for $700 with only motor problems.. everything else is good (can't believe i got it that cheap)

i have done alot of research and this truck with a full cage and full interior it weights in at a wopping 3600lbs!!!!!!!!!!!

this is what i already have!!

LQ9 (6.0L iron block) fully forged
LQ9 ported heads
232/234 .595/.598 112 comp cam (and all supporting mods)
ls6 intake
ported f-body T-body
built 4l60e
b&m 3200 stall
NOS dual stage nitrous (125-175 and 50-100)
f-body fans
2001 TA wiring harness

this is what i still need

stand alone fuel system to feed nitrous (C116)
REAL GOOD SUSPENSION
possibly radiator
long tubes
motor mounts
ect.

and i plan on using it as a daily driver and a hell of a weekend warrior (street more or less)

things i want

fast 90/90
Xtreme body kit
wheels of some sort (possibly c6 wheels)
ls2 fuel rail covers
cut-outs
a good rear end (8.8/9")
and alot more

anyway here is the way i found her

Frank5L · 09-11-2008, 08:04 AM

Add caltrac's and split mono leafs to that list... Trust me

1.32 best 60' on M/T Radials...

That could be a fun little truck! Good luck keeping the 4Lsickly in it though.

denali_on_26's · 09-11-2008, 11:56 AM

what is the split mono leafs?
and as far as the 4l****ty i have a th-400 that never got put into my lightning but i am looking for a 4l80

Frank5L · 09-11-2008, 12:00 PM

Calvert Racing, home of CalTracs, "The Bar With The Bite"

denali_on_26's · 09-11-2008, 12:03 PM

thanks Frank

DallasGT01 · 09-12-2008, 02:42 AM

nice!!

my98stang46 · 09-30-2008, 03:46 PM

Go ahead and cross off the LT's and mounts...I paid for those lol. Last I heard you had put your hands on a FAST 90. And I can probably find you an 8.8 If you want

denali_on_26's · 10-01-2008, 12:57 AM

i was just about to text you and see if you could find me a complete 8.8 out of a explored preferably so it will have 3.73 and a good limited slip and disk brakes...

and the LT's are a no go but YOU did pay for a QTP electronic cut-out, 07 LS2 vette fuel rail covers and some of a fast 90 setup!!!

my98stang46 · 10-08-2008, 02:13 PM

Glad I could help lol

09-11-2008, 02:25 AM	#1 (permalink)
denali_on_26's Registered User Join Date: May 2007 Posts: 1,119 View this user's gallery iTrader: 4 / 100%	MY new build....sorry well want to tell everyone hey!! and as everyone knows my turbo lightning burned a month ago or so without insurance on it..... so now this is what i will be building i just picked up a 2001 2 door blazer for $700 with only motor problems.. everything else is good (can't believe i got it that cheap) i have done alot of research and this truck with a full cage and full interior it weights in at a wopping 3600lbs!!!!!!!!!!! this is what i already have!! LQ9 (6.0L iron block) fully forged LQ9 ported heads 232/234 .595/.598 112 comp cam (and all supporting mods) ls6 intake ported f-body T-body built 4l60e b&m 3200 stall NOS dual stage nitrous (125-175 and 50-100) f-body fans 2001 TA wiring harness this is what i still need stand alone fuel system to feed nitrous (C116) REAL GOOD SUSPENSION possibly radiator long tubes motor mounts ect. and i plan on using it as a daily driver and a hell of a weekend warrior (street more or less) things i want fast 90/90 Xtreme body kit wheels of some sort (possibly c6 wheels) ls2 fuel rail covers cut-outs a good rear end (8.8/9") and alot more anyway here is the way i found her

09-30-2008, 03:46 PM	#7 (permalink)
my98stang46 FOR PERSIDENT!!! Join Date: Dec 2006 Location: Mobile, Alabama Posts: 1,714 View this user's gallery iTrader: 0 / 0%	Go ahead and cross off the LT's and mounts...I paid for those lol. Last I heard you had put your hands on a FAST 90. And I can probably find you an 8.8 If you want __________________ Silver 2001 #2566 JLP Thunder pipe, JLP stage 2 cams, cnl plenum, catless mids, MAFia, FTVB, flowmaster cat-bak, 6# lower, RWTD tuned, 28x10x16 hoosiers/skinnies, JLP longbars, 2/4 Eibach drop, Ruslow battery tray, E-fans, TURBO COMING SOON 7.51@87.3 1/8 ET 1.84 60' 12.81@111 1/4 ET 2.46 60' http://www.youtube.com/user/strukby www.myspace.com/strukby

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode




Home \| Classified Ads \| Gallery \| Join the Club \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

09-11-2008, 08:04 AM	#2 (permalink)
Frank5L 1.37 60' on Drag Radials Join Date: Nov 2001 Location: Central AR Posts: 10,908 View this user's gallery iTrader: 22 / 100%	Add caltrac's and split mono leafs to that list... Trust me 1.32 best 60' on M/T Radials... That could be a fun little truck! Good luck keeping the 4Lsickly in it though.

09-11-2008, 11:56 AM	#3 (permalink)
denali_on_26's Registered User Join Date: May 2007 Posts: 1,119 View this user's gallery iTrader: 4 / 100%	what is the split mono leafs? and as far as the 4l****ty i have a th-400 that never got put into my lightning but i am looking for a 4l80

09-11-2008, 12:00 PM	#4 (permalink)
Frank5L 1.37 60' on Drag Radials Join Date: Nov 2001 Location: Central AR Posts: 10,908 View this user's gallery iTrader: 22 / 100%	Calvert Racing, home of CalTracs, "The Bar With The Bite"

09-11-2008, 12:03 PM	#5 (permalink)
denali_on_26's Registered User Join Date: May 2007 Posts: 1,119 View this user's gallery iTrader: 4 / 100%	thanks Frank

09-12-2008, 02:42 AM	#6 (permalink)
DallasGT01 Just a Slow HD... Join Date: Sep 2007 Location: FRISCO TEXAS!!!! Posts: 1,330 View this user's gallery iTrader: 0 / 0%	nice!!

10-01-2008, 12:57 AM	#8 (permalink)
denali_on_26's Registered User Join Date: May 2007 Posts: 1,119 View this user's gallery iTrader: 4 / 100%	i was just about to text you and see if you could find me a complete 8.8 out of a explored preferably so it will have 3.73 and a good limited slip and disk brakes... and the LT's are a no go but YOU did pay for a QTP electronic cut-out, 07 LS2 vette fuel rail covers and some of a fast 90 setup!!!

10-08-2008, 02:13 PM	#9 (permalink)
my98stang46 FOR PERSIDENT!!! Join Date: Dec 2006 Location: Mobile, Alabama Posts: 1,714 View this user's gallery iTrader: 0 / 0%	Glad I could help lol