Raymond_B

I thought it would be good to post this so everyone can see it

Once the Shiftmaster software is installed open the program up and go to the menu and choose EEC Tuner then choose Verify EEC Tuner. If it says the board needs updating press OK otherwise it will say it's up to date and you can press OK.

After you do that go back to EEC Tuner and choose Read Ford ROM.

NOTE:
Since you have an EEC-IV you are only dumping one bank and creating one file the software automatically names it t.bin.

This will take a bit so be patient. Once it's done it will display a screen with a bunch of HEX characters, just close it. Now you've loaded the PCM's memory to the Tuner. At this point you could start up the truck and drive around, it would be just like stock because you haven't changed anything yet. Remember unless you change something you are using the stock value.

Now moving on to the GUI..........

After you install the GUI-EEC Tuner program go to launch it up and go to View--->Configuration--->EEC Processor file and click on the (...) button to navigate to the your processor's .dat (lhbl04a.dat) file then click OK. This will load the components that can be modified for this processor family (similar to a template). Also in this area you will need to select the COM port that your computer uses for the Serial port. From there you will need to go to File---> Import ROM File and navigate to your t.bin (it should be in C:\Program Files\ShiftMaster\EEC Tuner that the Shiftmaster software created when you did a Read Ford ROM. Doing this will load the stock Ford binary file and you will be able to see all the stock settings and proceed with your modifications. To change something in the GUI you click on it and then enter your value making sure to "check" the small box to the left with an X. Once you have changed and checked your items with the key on, engine off you can go to File and select Configure EEC-Tuner. Doing so will download your modifications to the EEC-Tuner. Then just turn the key back off, now you're ready to go.


------------------
Thanks,
Raymond
Performance Specialties
01 Cobra
95 Lightning (lots O' mods faster than the Cobra)