New Authorized Distributor of Pro Finish Hoods.

12-05-2001, 05:00 PM

December 5, 2001

JDM Engineering, Inc. has announced that it has become an authorized distributor of Pro Finish Hoods and Accesories.

Pro Finish-Pro Glass' background includes over 20 years of custom paint, auto body, and restoration experience. There Products are hand produced ( NO CHOP). They only use the finest in polyester and materials. Each hood is bonded using precise fixtures that gaurentee an original equipment fit and finish every time.

We here at JDM are proud to be associated with such a fine company and team.

Swing over to JDM's website for more information.

------------------
Visit JDM's website at www.TeamJDM.com or www.JDMEngineeringInc.com

12-05-2001, 05:54 PM

The material they use around the hinge areas and other pressure points is the same 'glass and resin that is used in making boats !!!
Tough F****ng S**t !!!!!

12-16-2001, 04:01 PM

When are you guys going to post some pictures of the hoods that you are going to be carrying? Does Terry make one of those Ram Air hoods?
Later...

12-16-2001, 05:07 PM

Here's the catolog of Pro-Finish hoods.
http://www.profinish-proglass.com/im...002catalog.jpg

12-16-2001, 06:54 PM

Rob,
Who in the h**l would paint a hood orange!!!! Is that the club Hootermobile?
J/K
Jerry

12-17-2001, 05:15 AM

does pro finish make the cobra style hood for our trucks?

12-17-2001, 09:19 AM

Yes.
Check the link I provided above.

12-17-2001, 12:28 PM

Do they offer any Gen1 stuff?
-Joe C.

12-20-2001, 09:15 PM

Do the plan on offering the Shaker hood for the gen1 lightnings?

------------------
1993 Ford Lightning
1977 Ford F250 Hi-boy 4x4
1953 Ford Pickup
1988 HOnda TRX250R

01-04-2002, 05:09 AM

I would be very interested in a shaker hood for a gen1 as long as it looked nice!

------------------
93 red Lightning
poly bushings
Timing @ 14*BTDC
rear exit exhaust
straight pipes
Under Drive Pulleys
Diesel Tube
180* thermostat
Downs Ford jump seat
Build #3949 of 5276
best time:15.031 @ 91.21MPH

Since last time at track:
Level 10 shift kit

OUR NEXT TARGET!! ALL YOUR BUTT ARE BELONG TO US!

12-05-2001, 05:00 PM	#1 (permalink)
Justin@JDM Guest Posts: n/a View this user's gallery iTrader: / %	New Authorized Distributor of Pro Finish Hoods. December 5, 2001 JDM Engineering, Inc. has announced that it has become an authorized distributor of Pro Finish Hoods and Accesories. Pro Finish-Pro Glass' background includes over 20 years of custom paint, auto body, and restoration experience. There Products are hand produced ( NO CHOP). They only use the finest in polyester and materials. Each hood is bonded using precise fixtures that gaurentee an original equipment fit and finish every time. We here at JDM are proud to be associated with such a fine company and team. Swing over to JDM's website for more information. ------------------ Visit JDM's website at *www.TeamJDM.com* or www.JDMEngineeringInc.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode




Home \| Classified Ads \| Gallery \| Join the Club \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

12-05-2001, 05:54 PM	#2 (permalink)
RobG Guest Posts: n/a View this user's gallery iTrader: / %	The material they use around the hinge areas and other pressure points is the same 'glass and resin that is used in making boats !!! Tough F**ng St !!!!!

12-16-2001, 04:01 PM	#3 (permalink)
Black 2000 Guest Posts: n/a View this user's gallery iTrader: / %	When are you guys going to post some pictures of the hoods that you are going to be carrying? Does Terry make one of those Ram Air hoods? Later...

12-16-2001, 05:07 PM	#4 (permalink)
RobG Guest Posts: n/a View this user's gallery iTrader: / %	Here's the catolog of Pro-Finish hoods. http://www.profinish-proglass.com/im...002catalog.jpg

12-16-2001, 06:54 PM	#5 (permalink)
STORMFRONT Guest Posts: n/a View this user's gallery iTrader: / %	Rob, Who in the h**l would paint a hood orange!!!! Is that the club Hootermobile? J/K Jerry

12-17-2001, 05:15 AM	#6 (permalink)
J15BIG Guest Posts: n/a View this user's gallery iTrader: / %	does pro finish make the cobra style hood for our trucks?

12-17-2001, 09:19 AM	#7 (permalink)
RobG Guest Posts: n/a View this user's gallery iTrader: / %	Yes. Check the link I provided above.

12-17-2001, 12:28 PM	#8 (permalink)
LETSRCE Guest Posts: n/a View this user's gallery iTrader: / %	Do they offer any Gen1 stuff? -Joe C.

12-20-2001, 09:15 PM	#9 (permalink)
jd250r Guest Posts: n/a View this user's gallery iTrader: / %	Do the plan on offering the Shaker hood for the gen1 lightnings? ------------------ 1993 Ford Lightning 1977 Ford F250 Hi-boy 4x4 1953 Ford Pickup 1988 HOnda TRX250R

01-04-2002, 05:09 AM	#10 (permalink)
GEN1_4_U_2_NV Guest Posts: n/a View this user's gallery iTrader: / %	I would be very interested in a shaker hood for a gen1 as long as it looked nice! ------------------ 93 red Lightning poly bushings Timing @ 14BTDC rear exit exhaust straight pipes Under Drive Pulleys Diesel Tube 180 thermostat Downs Ford jump seat Build #3949 of 5276 best time:15.031 @ 91.21MPH Since last time at track: Level 10 shift kit OUR NEXT TARGET!! ALL YOUR BUTT ARE BELONG TO US!