A good cam for my Gen1...

steelman1196 · 02-28-2009, 12:19 PM

I have a 1993 Lightning with a 408 stroker and a 70 MM throttle body, low restriction air filter, Edelbrock Performer aluminum heads, underdrive pulleys and no computer upgrade tune except for one of those cheap plug-in chips. I am ready to install a camshaft to accomodate the upgrades I currently have. I am going to take it to the dragstrip occasionally. Does anyone have a suggestion on a cam selection? Thanks!

lightning_2000 · 02-28-2009, 04:39 PM

contact psi im sure they can set u up with a good 1

steelman1196 · 03-03-2009, 11:55 PM

Thanks for that info!

02-28-2009, 12:19 PM	#1 (permalink)
steelman1196 Registered User Join Date: Apr 2008 Posts: 12 View this user's gallery iTrader: 0 / 0%	A good cam for my Gen1... I have a 1993 Lightning with a 408 stroker and a 70 MM throttle body, low restriction air filter, Edelbrock Performer aluminum heads, underdrive pulleys and no computer upgrade tune except for one of those cheap plug-in chips. I am ready to install a camshaft to accomodate the upgrades I currently have. I am going to take it to the dragstrip occasionally. Does anyone have a suggestion on a cam selection? Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode




Home \| Classified Ads \| Gallery \| Join the Club \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

02-28-2009, 04:39 PM	#2 (permalink)
lightning_2000 Stroked & Blown Join Date: Apr 2005 Location: McMinnville, Tn Posts: 3,187 View this user's gallery iTrader: 21 / 100%	contact psi im sure they can set u up with a good 1

03-03-2009, 11:55 PM	#3 (permalink)
steelman1196 Registered User Join Date: Apr 2008 Posts: 12 View this user's gallery iTrader: 0 / 0%	Thanks for that info!