SuperT

If you want in on a ZEX group purchase let me know Zex is a safer nitrous to run than
any other. It will be $100 off for the
full kit. Which puts it around the 480's

The Zex kit is self regulating and adjusts fuel pressure according to bottle pressure.
It is TPS activated and include a one year warranty.

Email me for details.

tblanchard@scperformance.com

Jeff S

How about posting the details here? I'd like to know more about it.

------------------
Later!
Jeff S.
President, NLOC

#74 in '95 - 11.92@115.2
#582 in '00 - 13.36@101.75 (Swanson chip ONLY)

SuperT

Details, well, as far as pricing goes, it costs $595 from Zex and 4 or more will
get it for $489. This is the whole kit
Ignore the part number listed for the
kit, you would get the appropriate one
for your Truck. Also, I will see if I can get some plugs and bigger jets, they have a 75,100 and 125 available as well in this.

Kit Includes the following:
ZEX™ Nitrous Management Unit (Part #82007), U.S. Patent #5,967,099

Plug & play performance - All major components are contained in the ZEX™ "NMU", which means you won't have any unsightly solenoids or wiring.
Worlds only "Smart" nitrous system - Uses actual bottle pressure to regulate the nitrous to fuel ratio, always optimizing the mix. Never too rich, never too lean!
Our difference in approach results in more horsepower per nitrous used through all bottle pressures.
ZEX™ 15amp Power Arming Switch With Cover (Part #82002)

Protective cover prevents accidental system arming
High quality steel toggle switch allows many years of trouble-free service
Available assembled or as individual parts
Switch cover only - Part #NS6545
Switch only, no cover - Part #NS6551
ZEX™ Nitrous Supply Bottle And Control Head (Part #82000)

Chrome bottle valve
Chrome bottle nut
10 lbs. purple nitrous bottle
-4AN Bottle valve fitting
Teflon bottle valve seal
Siphon tube
ZEX™ Nitrous Nozzle (Part #NS6550)

Precision CNC machined aircraft quality aluminum construction
Simple installation, screws into air intake tube behind mass air flow sensor
Three flow jet sets are included for your choice of 55hp, 65hp, or 75hp
Unique design provides perfect atomization of nitrous with intake air supply
ZEX™ Nitrous System Brackets, Hoses, & Hardware

Bottle brackets
Bracket, tall - (1)
Bracket, short - (1)
Nitrous delivery lines
-3AN stainless steel braided line, two feet long - (1)
-4AN stainless steel braided line, fifteen feet long - (1)
Vacuum hoses
Rubber hose, twenty-four inches long, 3/16 SAE30R/KY - (2)
3/16 inch hose clamps - (4)
Nozzle accessories
Nozzle bulkhead fitting - (1)
Tap for cutting threads into the air intake - (1)
Other hardware
Wire taps - (2)
Barrel connector - (1)
Spade connector - (1)
Ring Terminal - (1)
Black cable ties - (10)
Grommets - (2)
Printed installation manual with pictures - (1)
not legal for sale or use in California on pollution controlled vehicles

lil'Zeus

I have read articles on this system in MM&FF on a mustang a couple of months ago and its a really impressive and neat set up with the smart box.

I might me interested in trying juice and a blower but only if I run a small shot. Can you get smaller jets, like 30 or 40 shots?? Also does it come with a purge system b/c I didn't see one listed?? If anything, it would be cool just as a "ah" factor!! LOL

Thanks

------------------
Shane L.
Black 93
Vortech S-trim
340hp and 404ft.lbs
best ET yet: 13.52 @ 101.08 on the rev limiter
SAVING for a 99 GT, Have to stop spending $ on the L

SuperT

LZ, I will have to check on the purge for
you. It starts at 55hp shot, but I will see
if they have anything less than that.

http://www.scperformance.com/ASP/GroupBuys/Zex.asp

Tom

Jeff S

If I can get a setup with a 125 (preferably 150) hp jet, I'm definitely interested.

Thanks!
Jeff S.

SuperT

Jeff you can have your choice of the 55,65,75 kit or the 75,100,125 kit.
LZ as far as the purge valve goes, they
said they are currently working on one.

Tom

lil'Zeus

Sweet...

I have read articles on this system and have a question. The smart electronic controller ups you fuel pressure relative to bottle pressure right?!?! But would this be good on supercharged apps because I'm running an FMU? Would it boost FP to high under boost and juiced conditions? Just food for thought I suppose.

------------------
Shane L.
Black 93
Vortech S-trim
340hp and 404ft.lbs
best ET yet: 13.52 @ 101.08 on the rev limiter
SAVING for a 99 GT, Have to stop spending $ on the L

SuperT

Yes, it boosts fuel pressure under juice relative to juice bottle pressure.

Let me quote them again:

"Worlds only "Smart" nitrous system - Uses actual bottle pressure to regulate the nitrous to fuel ratio, always optimizing the mix. Never too rich, never too lean! "

Tom

Carolina Typhoon

Yeah, ZEX is badass. no solenoids or anything that can be really seen. The hardest part is finding a good place to put the box. www.zex.com

Anyways, I've been looking into ZEX but no one over at the SyTy board really likes the stuff on there truck. A small shot like 50 or so shouldn't be too bad. Does anyone know if ZEX makes a setup for our trucks? Or L98 TPI F-bodies/Vettes? Thanks

SuperT

They have a setup that will work for the L's; but I have no idea about the F-Bodies.
They need a certain voltage measurement
from the tps. Most GM's do not give the voltage readout that the setup needs and
you have to adapt it to work.
For the L, it would be a bolt-in.
I can ask if you want one.

Tom

SuperT

GP on this is scheduled to end the 15th.

Tom

95Blitzkrieg

Tom
is the GP over?