FASTASSTRUCK

GOING TO LOWER MY 2001, IS BELL TECH THE ONLY WAY TO GO??? AND IS IT A BIG JOB ,I DONT WANT TO SCREW WITH THIS TRUCK TO MUCH
IT JUST RUNS TO DAMN GOOD!!!!

Gitchi Manitou

Not the only way to go, but I hear it's the best.

NC Lightning

D.J.M makes a very nice kit for our trucks.Springs,lower control arms and camber kit for the front.The rear uses a new set of hangers,shackles and shorter bump stops.You will also need a 2degree pinion angle wedge to correct the drive shaft angle.I have 5" 6" kit which have to use a in frame notch,I also use Firestone 2600c bags for the rear so I can still haul my show truck.If you get the 3"4" kit I would still recomend a in frame notch unless you don't mind hearing your rear hit the bump stops in the rear.REMBER OUR TRUCKS ARE LOWERED FROM THE FACTORY 1" SO A 3"4" KIT IS REALLY A 4"5" DROP!!!!!It should only take about 8 hours start to finish including the alignment.Have fun if you have any questions let me know.

------------------
//NC\\\\
Worlds Lowest
OFTEN IMITATED....
NEVER DUPLICATED

hdmlnium

FASTASSTRUCK:
BellTech isn't the only way to go, but it is a pretty good kit. That is the kit that I used, the BellTech 3/4 kit with the BellTech nitro-active shocks. I have pics in my zing album of what the kit includes. also of my truck before and after the kit. Bill

------------------
hdmlnium
2000 white lightning #2030 built 4/6/00- thursday
muth mirrors,door handle key pad,fog light mod
clear corners,super white headlights,fogs,corners,
trenz billet grills,billet 3rd brake light cover,
factory harley davidson tonneau cover, BedRug
JDM flip chip,JDM lower pulley,5" aluminum driveshaft,
90mm mass air,JDM tranny mod,JL stage 2 ram air kit
BellTech 3"/4" lowering kit
2001 tails installed
20 inch chrome lightning wheels on order
More to come......
2000 harley davidson FLSTC (tons of custom parts)
99.5 Nissan Pathfinder LE (STILLEN EQUIPPED)
91 mr2 turbo (to many mods to list)
88 toyota show truck (tonka)
2000 yamaha banshee(toomy race kit/chrome
pipes)
my zing albums-
http://www.zing.com/album/?id=4293038163

Ivanhoe_Farms

If you don't want to take a chance messing it up, let Roush do it!!!

staged18

so cal speed shop designed a lowering kit for the truck that is really nice it cost 750 last time i checked .they have a project 99 that they are working on and they are on the web .i th8nk it's www.socalspeed.com but if you search it you can find it easy .they have pictures of it on the l2 and everything...later
red99

FASTASSTRUCK

IS THERE A KIT THAT WOULD LET YOU DROP IT ONLY 2INCHES, OR ARE THEY ALL 3/4 DROP???

hdmlnium

FASTASSTRUCK:
BellTech also has a 2/3 kit that they sell.


------------------
hdmlnium
2000 white lightning #2030 built 4/6/00- thursday
muth mirrors,door handle key pad,fog light mod
clear corners,super white headlights,fogs,corners,
trenz billet grills,billet 3rd brake light cover,
factory harley davidson tonneau cover, BedRug
JDM flip chip,JDM lower pulley,5" aluminum driveshaft,
90mm mass air,JDM tranny mod,JL stage 2 ram air kit
BellTech 3"/4" lowering kit
2001 tails installed
20 inch chrome lightning wheels on order
More to come......
2000 harley davidson FLSTC (tons of custom parts)
99.5 Nissan Pathfinder LE (STILLEN EQUIPPED)
91 mr2 turbo (to many mods to list)
88 toyota show truck (tonka)
2000 yamaha banshee(toomy race kit/chrome
pipes)
my zing albums-
http://www.zing.com/album/?id=4293038163

FASTASSTRUCK

THANKS MAN,
DAMN,IJUST GOT THHIS THINGAND MY WISH LIST IS GETTIN PRETTY LONG!!!!

NC Lightning

You can get a 2"dropby using a new set of coils up front or just lower controll arms.As for the rear just use the shackels.

------------------
//NC\\\\
Worlds Lowest
OFTEN IMITATED....
NEVER DUPLICATED

lightngsvt

Hey NC Lightning, any pics of your truck? Id love to see it! I love lowered trucks, my 93 is dropped 3"/4" with a Belltech kit and if my offer goes through on a new 2000 it too will get at least a 3"/4" drop.

------------------
Chuck P
1993#3951 (24k miles, mod'ed and lots of custom parts)
NLOC#138
MiLOC#10
00 Focus ZX3
99 GT conv
91 GT (race/show car- in hibernation)

Blklightning

I lowered the rear of my truck with drop shackles, but I want to do the whole truck and go and go even lower.. What is the cheapest way to go? Im kinda broke now..

------------------
Kyle
Black 99L
Born #442 on April 20,99
Tinted windows
Full audio system including: Alpine head unit, Alpine 6 disk CD changer, 2 Alpine V12 Amps, Kenwood speakers and tweeters and 2 JL Audio 10 inch subs
snuglid bed cover
Cobra Radar
HID headlights and fog lights
clear corners w/super white turn signals
Blue street glow neons/headlight strobes
2 inch drop
Performance mods comming later. (shes fast enough for now)

NC Lightning

Sorry I don't have any way to get pics on the net at this time.
THERE ARE 2 WAYS OF LOWERING A TRUCK,THE RIGHT WAY AND THE CHEAP WAY!!!!IF YOU CAN'T DO IT THE RIGHT WAY DON'T DO IT AT ALL!!!!THAT'S WHAT GIVES THE LOWERED TRUCK SCENE SUCH BAD WRAP...A BUNCH OF PEOPLE HACKING THERE TRUCKS APART JUST BECOUSE THERE TO CHEAP!!!SO FOR THE SAKE OF ALL OF US DON'T DO IT TILL YOU CAN AFFORD IT...

------------------
//NC\\\\
Worlds Lowest
OFTEN IMITATED....
NEVER DUPLICATED

Z28KLR

Whats the cheap way? coils and shackel?

------------------
4.10's
PSP filter kit

NC Lightning

No cutting your factory coils bown.

------------------
//NC\\\\
Worlds Lowest
OFTEN IMITATED....
NEVER DUPLICATED