Bunch of ?'s

01-04-2002, 09:09 PM

Ok I made a post eairlier and I don't think it was adequite. So here I go.

1. Underdrive Pully's
How much hp gain and will it work with my S/C?
2. MSD Ignition, Boost Retard.
Will it help in power? What if will it help?
3. Traction Bars.
Were are some good ones for Gen 1 L's?
4. Electric Fans
How Much gain?

Thanx

Tom
95 White #2278
Cervinis RamAir Hood
93 Black #3787
Bassani (Full Nastruck)
Powerdyned at 6#
Edelbrock Aluminum Performer Heads
Motorsports Cam&Lifters
Hypertech Chip
K&N

01-04-2002, 09:22 PM

I'm no expert, but I'll take a crack at them

1.) not the standard ones, but you can get special ones that incorporate an overdrive blower pulley and an underdrive crank pulley into on unit. These come highly recommended by everyone around here who has used them.

2.) I doubt the MSD by itself would do much in the way of hp gains. Boost retard will let you run more initial timing without pinging at higher rpms, so it would give your low end a boost. I seem to remember someone saying you could effectively use the EEC tuner as a boost retard too, so maybe consider than instead of the MSD.

3.) Ranchos and Cal-Tracs

4.) Haven't done this, but probably a tenth, plus you get to get rid of that huge annoying fan shroud (stupid thing always seems to bite me), and you can set it up to run while the truck is off to cool down at the track.

01-04-2002, 09:28 PM

Hey BLog do you know who sales the underdrive over driven blower pulley for a gen1 with a bd11?

01-04-2002, 09:36 PM

Yes i do, but for the life of me i can't remember. Lemme search the forum for a minute.

01-04-2002, 09:40 PM

AHA!

ASP makes them, www.autospecialties.com

You can order from them and i think from summit also. If i remember correctly, the part number was 713000 but let me check on that too.

*EDIT* I'm pretty sure the part number is 813000, not 713000 - summit lists the 813 as backordered, and says the 713 isn't a valid number.

[This message has been edited by BLoG (edited 01-04-2002).]

01-04-2002, 09:42 PM

See above edit - i'm pretty sure its ASP813000.

I'm sure someone will be in to confirm/deny soon enough.

$129 + shipping from ASP direct.

[This message has been edited by BLoG (edited 01-04-2002).]

01-04-2002, 09:52 PM

All looks right to me!

------------------

My Webshot Page
Gal. 2:20-21

01-04-2002, 09:09 PM	#1 (permalink)
BackinBlack93 Guest Posts: n/a View this user's gallery iTrader: / %	Bunch of ?'s Ok I made a post eairlier and I don't think it was adequite. So here I go. 1. Underdrive Pully's How much hp gain and will it work with my S/C? 2. MSD Ignition, Boost Retard. Will it help in power? What if will it help? 3. Traction Bars. Were are some good ones for Gen 1 L's? 4. Electric Fans How Much gain? Thanx Tom 95 White #2278 Cervinis RamAir Hood 93 Black #3787 Bassani (Full Nastruck) Powerdyned at 6# Edelbrock Aluminum Performer Heads Motorsports Cam&Lifters Hypertech Chip K&N

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode




Home \| Classified Ads \| Gallery \| Join the Club \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

01-04-2002, 09:22 PM	#2 (permalink)
BLoG Guest Posts: n/a View this user's gallery iTrader: / %	I'm no expert, but I'll take a crack at them 1.) not the standard ones, but you can get special ones that incorporate an overdrive blower pulley and an underdrive crank pulley into on unit. These come highly recommended by everyone around here who has used them. 2.) I doubt the MSD by itself would do much in the way of hp gains. Boost retard will let you run more initial timing without pinging at higher rpms, so it would give your low end a boost. I seem to remember someone saying you could effectively use the EEC tuner as a boost retard too, so maybe consider than instead of the MSD. 3.) Ranchos and Cal-Tracs 4.) Haven't done this, but probably a tenth, plus you get to get rid of that huge annoying fan shroud (stupid thing always seems to bite me), and you can set it up to run while the truck is off to cool down at the track.

01-04-2002, 09:28 PM	#3 (permalink)
lightninggen1 Guest Posts: n/a View this user's gallery iTrader: / %	Hey BLog do you know who sales the underdrive over driven blower pulley for a gen1 with a bd11?

01-04-2002, 09:36 PM	#4 (permalink)
BLoG Guest Posts: n/a View this user's gallery iTrader: / %	Yes i do, but for the life of me i can't remember. Lemme search the forum for a minute.

01-04-2002, 09:40 PM	#5 (permalink)
BLoG Guest Posts: n/a View this user's gallery iTrader: / %	AHA! ASP makes them, www.autospecialties.com You can order from them and i think from summit also. If i remember correctly, the part number was 713000 but let me check on that too. EDIT I'm pretty sure the part number is 813000, not 713000 - summit lists the 813 as backordered, and says the 713 isn't a valid number. [This message has been edited by BLoG (edited 01-04-2002).]

01-04-2002, 09:42 PM	#6 (permalink)
BLoG Guest Posts: n/a View this user's gallery iTrader: / %	See above edit - i'm pretty sure its ASP813000. I'm sure someone will be in to confirm/deny soon enough. $129 + shipping from ASP direct. [This message has been edited by BLoG (edited 01-04-2002).]

01-04-2002, 09:52 PM	#7 (permalink)
Litl Sam Guest Posts: n/a View this user's gallery iTrader: / %	All looks right to me! ------------------ My Webshot Page Gal. 2:20-21