Trans Help!!!

turnerlightning · 03-28-2009, 05:27 PM

My trans wiring harness came loose and laid against the header and melted. I noticed when I went to leave a traffic light and the truck was in overdrive. I only had 1st and 4th and I had to shift between them on the column. So I got a new harness and installed it. It still shows the same 13 codes
P1460, P1229, P0740, P0743, P0755, P0750, P1747, P1754, P1760, P0443, P1451, P0135, P0155
I keep clearing the codes but it only takes a minute for them to show back up. I have a new built motor in the truck that I just finished the breakin miles on and have been trying to take to JJ but things keep coming up. I can not afford to keep replacing everything on this truck. If this is going to be major to repair I may have to sell. Any help would be appreciated.

Thanks, Jeremy

turnerlightning · 04-05-2009, 04:18 PM

If anyone is interested...If you short something out like I did when my harness melted. You need to check the fuse at the ECU. JJ @ WMS told me to have it checked and Now I am back on the road.

03-28-2009, 05:27 PM	#1 (permalink)
turnerlightning Registered User Join Date: Mar 2007 Location: Dover, DE Posts: 37 View this user's gallery iTrader: 0 / 0%	Trans Help!!! My trans wiring harness came loose and laid against the header and melted. I noticed when I went to leave a traffic light and the truck was in overdrive. I only had 1st and 4th and I had to shift between them on the column. So I got a new harness and installed it. It still shows the same 13 codes P1460, P1229, P0740, P0743, P0755, P0750, P1747, P1754, P1760, P0443, P1451, P0135, P0155 I keep clearing the codes but it only takes a minute for them to show back up. I have a new built motor in the truck that I just finished the breakin miles on and have been trying to take to JJ but things keep coming up. I can not afford to keep replacing everything on this truck. If this is going to be major to repair I may have to sell. Any help would be appreciated. Thanks, Jeremy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode




Home \| Classified Ads \| Gallery \| Join the Club \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

04-05-2009, 04:18 PM	#2 (permalink)
turnerlightning Registered User Join Date: Mar 2007 Location: Dover, DE Posts: 37 View this user's gallery iTrader: 0 / 0%	If anyone is interested...If you short something out like I did when my harness melted. You need to check the fuse at the ECU. JJ @ WMS told me to have it checked and Now I am back on the road.