Fore Billet Fuel hat sale.

FordFanStan · 09-25-2008, 08:00 PM

Fore fuel hat sale:

DMP is the cheapest place to buy Fore billet fuel hats period!

EDIT: We have been sold out and currently out of stock of the GSS342 pumps (10/21/2008)

$425 w/o pumps shipped to your door.*

This is the ultimate fuel system upgrade to retain your stock fuel tank and add an aftermarket high performance fuel system. These will eliminate all the possible in-tank issues; as bursted or split fuel hose, elongated hose clamps, cracked wyes, etc. The result and cost of one of these failures can be very detrimental to your powertrain; do not let this happen to your pride and joy.

Now if this is not enough of a savings, if you have previously purchased a DMP engine or transmission, we will take off another 5% off the total, meaning $403.75 without pumps.

* Free Shipping within the continental 48 US States.

__________________________________________________ ______________________

In addition, DMP is the ONLY dealer to provide the correct fittings to retain your stock fuel lines for those of you who do not want to upgrade the entire fuel system at this time.

The fitting setup consists of two (2) quick connect adaptors, two (2) 90* fittings, and two (2) stock fuel line adaptors. (fittings will be blue and black)

The fittings are $165, and we will include free shipping if you purchase at the same time as the hat.

We are also currently working on a bolt-on complete fuel system with new fuel lines, a new fuel filter, new rails and all the fittings and necessary hardware for installation, and can supply new injectors if need be as well. I will update with that info here in this section when it is complete. We will be thoroughly testing it on a high hp Lightning soon to really put it to work and see just how much power these fuel systems will handle.

If you have questions or would like to place an order please feel free to give the shop a call or email or PM me and I would be glad to assist you. Thank you for your interest, Stan

Haybale · 09-26-2008, 12:30 AM

So if I buy the fuel hat and pumps I still need to buy the fittings to use my stock lines?

FordFanStan · 09-26-2008, 02:18 AM

Yes to retain the stock lines without any modification, these fittings are needed. Most people want this fuel hat because it will easily accept aftermket lines and fittings allow you to use the stock tank with an aftermarket fuel system, (and the obvious safety reasons of in-tank fuel issues), but there are a few that will want to run this with the stock lines, hence why I came up with the fitting package. FFS

DallasGT01 · 10-01-2008, 05:40 PM

i want to see more pics of the lower end of the hat...also will it accept 3 pumps??

FordFanStan · 10-09-2008, 01:50 PM

Yes it does accept three pumps, but it does not include any extra relays or electronics to control the third pump and we have not tested in the 3 pump application. What do you want to see pictures of? FFS

DallasGT01 · 10-09-2008, 01:53 PM

Quote:

Originally Posted by FordFanStan

Yes it does accept three pumps, but it does not include any extra relays or electronics to control the third pump and we have not tested in the 3 pump application. What do you want to see pictures of? FFS

i meant the top...

will it come with a wiring diagram of what to wire where and which relays???

The Swede · 10-12-2008, 06:09 PM

That thing sure is sexy, almost a shame to put it in the tank.

09-25-2008, 08:00 PM	#1 (permalink)
FordFanStan Supporting Vendor Paid Member Join Date: Feb 2005 Location: San Diego, Ca. Posts: 1,923 NLOC member #: 2314 View this user's gallery iTrader: 1 / 100%	Fore Billet Fuel hat sale. Fore fuel hat sale: DMP is the cheapest place to buy Fore billet fuel hats period! EDIT: We have been sold out and currently out of stock of the GSS342 pumps (10/21/2008) $425 w/o pumps shipped to your door.* This is the ultimate fuel system upgrade to retain your stock fuel tank and add an aftermarket high performance fuel system. These will eliminate all the possible in-tank issues; as bursted or split fuel hose, elongated hose clamps, cracked wyes, etc. The result and cost of one of these failures can be very detrimental to your powertrain; do not let this happen to your pride and joy. Now if this is not enough of a savings, if you have previously purchased a DMP engine or transmission, we will take off another 5% off the total, meaning $403.75 without pumps. * Free Shipping within the continental 48 US States. __________________________________________________ ______________________ In addition, DMP is the ONLY dealer to provide the correct fittings to retain your stock fuel lines for those of you who do not want to upgrade the entire fuel system at this time. The fitting setup consists of two (2) quick connect adaptors, two (2) 90* fittings, and two (2) stock fuel line adaptors. (fittings will be blue and black) The fittings are $165, and we will include free shipping if you purchase at the same time as the hat. We are also currently working on a bolt-on complete fuel system with new fuel lines, a new fuel filter, new rails and all the fittings and necessary hardware for installation, and can supply new injectors if need be as well. I will update with that info here in this section when it is complete. We will be thoroughly testing it on a high hp Lightning soon to really put it to work and see just how much power these fuel systems will handle. If you have questions or would like to place an order please feel free to give the shop a call or email or PM me and I would be glad to assist you. Thank you for your interest, Stan Last edited by FordFanStan; 10-21-2008 at 10:10 AM.

09-26-2008, 12:30 AM	#2 (permalink)
Haybale Don't upset Little Man!!! Join Date: Aug 2006 Location: Imperial Beach, CA; From Osakis, MN Posts: 450 View this user's gallery iTrader: 1 / 100%	So if I buy the fuel hat and pumps I still need to buy the fittings to use my stock lines? __________________ Ryan '99' 'L' Black #1339, DOB May 17, 1999 DMPLB/Trans, XCAL 2,PB 6lb/2.7, SBTB, MAC CAI, C&L Upper Plenum/Elbow, Meizer IC pump, BA2400 90mm MAF, Nitto 555's front and DR's on back. 470 hp 580 tq PB 12.70 @ 107, Fontana Thanks Stan and Dante @ DMP for all their help!!!

09-26-2008, 02:18 AM	#3 (permalink)
FordFanStan Supporting Vendor Paid Member Join Date: Feb 2005 Location: San Diego, Ca. Posts: 1,923 NLOC member #: 2314 View this user's gallery iTrader: 1 / 100%	Yes to retain the stock lines without any modification, these fittings are needed. Most people want this fuel hat because it will easily accept aftermket lines and fittings allow you to use the stock tank with an aftermarket fuel system, (and the obvious safety reasons of in-tank fuel issues), but there are a few that will want to run this with the stock lines, hence why I came up with the fitting package. FFS __________________ *Dantes Modular Performance* 1635 Coolidge Ave. National City, Ca. 91950 619-474-8675 See Our Monthly Specials Here!

10-12-2008, 06:09 PM	#7 (permalink)
The Swede Registered User Join Date: Jan 2006 Location: Sweden Posts: 110 View this user's gallery iTrader: 2 / 100%	That thing sure is sexy, almost a shame to put it in the tank. __________________ My truck - Click me

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode




Home \| Classified Ads \| Gallery \| Join the Club \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

10-01-2008, 05:40 PM	#4 (permalink)
DallasGT01 Just a Slow HD... Join Date: Sep 2007 Location: FRISCO TEXAS!!!! Posts: 1,348 View this user's gallery iTrader: 0 / 0%	i want to see more pics of the lower end of the hat...also will it accept 3 pumps??

10-09-2008, 01:50 PM	#5 (permalink)
FordFanStan Supporting Vendor Paid Member Join Date: Feb 2005 Location: San Diego, Ca. Posts: 1,923 NLOC member #: 2314 View this user's gallery iTrader: 1 / 100%	Yes it does accept three pumps, but it does not include any extra relays or electronics to control the third pump and we have not tested in the 3 pump application. What do you want to see pictures of? FFS